The steps to load paper (load) on a pricer may vary depending on the model and brand of pricer, but generally include the following basic steps:
1.Preparation tools: Make sure you have new label rolls and pricefinders.
2.Open the ticker: It is usually necessary to open the lid or back cover of the ticker first so that the paper roll can be replaced.
3.Remove old paper rolls: If you already have used paper rolls in the price checker, you need to remove them first.
4.Place New Paper Roll: Place the new label paper roll on the reel inside the price adjuster. Make sure the roll is oriented correctly, some price drawers may require the specific side of the roll to be facing up.
5.Adjust the paper: Thread the start of the paper roll through the paper guide track inside the price changer to ensure that the paper is smooth.
6.Hold the paper: Depending on the model of the pricer, you may need to insert one end of the paper into one of the fixing holes in the pricer, or secure it with a clip.
7.Close the price drawer: After confirming that the paper has been properly installed and secured, close the lid or back cover of the price drawer.
8.Test: Turn on the meter and test whether it can print normally to ensure that the paper can pass through the meter smoothly.
Please note that different tickers may have different ways of loading, so it is best to consult the marker's user manual or **search for a specific loading guide before loading. If you encounter difficulties in the process of loading paper, you can refer to the **instructions that come with the pricer**, or ***teaching**.