Technical advantages of large-scale low-temperature ultrafine grinder:
1.The crushing efficiency is high, the crushing capacity is strong, and the materials with fibrous, high toughness, high strength, high oil content and high sugar content can be crushed to the cell level powder.
2.Excellent technical process, fully enclosed operation, to prevent ingredient segregation and loss. The discharge particle size is fine, the particle size distribution is narrow, the purity is high, the chemical reaction speed is fast, the energy consumption is low, and the production efficiency is high. Mechatronics, intelligent control, programmable automatic adjustment and control temperature.
3.Low grinding temperature The grinding chamber is equipped with a cooling closed-circuit circulation system, and the powder discharge temperature is not higher than 40, which can make the softened or sticky drugs easy to crush after heating. The temperature of the refrigeration system can be configured up to 40 °C
4.The equipment operates in a closed manner, without any powder leakage, no pollution and no loss. It not only avoids the contamination of the surrounding environment by fine powder, but also controls the contamination of microorganisms and dust.
5.The process is simplified, the structure is compact, it is easy to assemble, disassemble and replace, easy to operate, and the installation and maintenance are very simple.
6.GMP design, technical standards, according to food and drug production standards, equipment quality in line with GMP technical requirements.
7.The models are complete, including small equipment suitable for small-scale production and scientific research experiments, as well as large and medium-sized equipment suitable for industrial production.
8.Equipped with a composite acoustic enclosure to reduce noise pollution.
Instructions for use of large low-temperature ultrafine pulverizer:
1.Check whether there are debris and other materials in the grinding drum before crushing, and if so, they should be cleaned.
2.When crushing, do not mix materials with high hardness and particle size greater than 6mm in the crushed material. Materials with a relatively high moisture content must be dried or freeze-dried to reduce the moisture content to 6%.
3.Always check the fastening screws of the rotating support before use, they must be tightened. The magazine must be snapped tightly.
4.Please use a suitable voltage source to ensure that the power cord is in good condition to avoid disasters or injuries.
5.In order to ensure the quality of crushing, the amount of each loading should be strictly controlled not less than 1 2
6.When operating, it cannot be used continuously for a long time under normal temperature conditions, and the boot time should not exceed 30 minutes each time. Prevent the bearing from overheating and damaging the motor. If it needs to be used in continuous production, it needs to be equipped with refrigeration equipment.
7.After long-term use, if the belt is seriously worn, if the hose is damaged or leaked, it should be replaced in time.
8.After each operation of ultra-fine grinding, the machine runs idle for 2min to suck the remaining materials clean.
9.If there is an abnormal sound during operation, it should be stopped immediately for inspection.
10.When the material is changed or the use is stopped for a long time, the grinding drum should be cleaned. The inner wall and medium of the grinding drum can be cleaned with starch, water, alcohol or other solvents, and dried with a dry cloth to ensure that the grinding drum and medium are dry. In addition to this, the large-scale low-temperature ultrafine pulverizer also has the following technical advantages:
1.Energy saving and environmental protection: The use of advanced low-temperature grinding technology can effectively reduce energy consumption and reduce environmental pollution.
2.High safety: the equipment design is reasonable, the operation is safe and reliable, and it meets the best standards.
3.Intelligent control: the use of advanced control system to achieve automatic control and improve production efficiency.
4.Wide range of application: It can be widely used in medicine, food, chemical industry, feed, pesticide and other fields.
5.Convenient maintenance: the equipment structure is simple, the parts are easy to replace, and the maintenance is convenient and fast.
6.High reliability: The equipment has undergone strict quality control and testing to ensure long-term stable operation.
7.Customizable: Equipment with different specifications and functions can be customized according to customer needs to meet individual needs.
8.Long life: Wear-resistant materials and advanced technology are used to prolong the service life of the equipment.
9.Humanized design: the appearance of the equipment is beautiful, the operation is simple and easy to understand, and it conforms to the principle of ergonomics.
When using a large low-temperature ultrafine pulverizer, the following points need to be noted:
1.Operate in strict accordance with the operation steps of the equipment manual, and illegal operation is prohibited.
2.Regularly check the health of the equipment to ensure that the equipment is operating properly.
3.Pay attention to the care and maintenance of the equipment, and replace the worn parts in time.
4.Keep the environment around the equipment clean and dry to avoid unnecessary damage to the equipment.
5.For special materials, special treatment or corresponding protective measures are required to avoid equipment damage or safety accidents.
In short, as an efficient, energy-saving and environmentally friendly crushing equipment, large-scale low-temperature ultrafine pulverizer has a wide range of application prospects and market demand. When selecting and using the equipment, its technical advantages and precautions for use should be fully considered to maximize the effectiveness of the equipment and prolong its service life.