The reason why a gear pump stops working can involve many aspects, including mechanical, liquid, electrical, and other factors.
The following are the main reasons that may cause the gear pump to stop working and the corresponding solutions:
1.Power failure:
Causes: Power outage**, motor failure, etc.
Solution: Check the power connection to make sure the power supply is normal. Inspect the motor and related electrical components, repair or replace faulty components.
2.Liquid ** Problem:
Causes: Liquid ** interruption, liquid level too low, etc.
Solution: Check the liquid ** line to ensure that the liquid ** is sufficient. Adjust the liquid level to a normal level.
3.Damage to pump blades or gears:
Cause: Pump blades or gears may fail due to wear, damage, or impurities.
Solution: Check the condition of the pump blades and gears, and replace the damaged parts.
4.Blockage inside the pump:
Cause: Impurities, solid particles, or foreign objects may have accumulated inside the pump, causing clogging.
Solution: Clean the pump and remove impurities or foreign matter. Clean filters and pipes regularly.
5.Sealing Issues:
Cause: Oil seals or other seals may be damaged or deteriorated.
Solution: Inspect and replace damaged oil seals or seals. Make sure the seals are intact.
6.Insufficient lubrication:
Cause: Insufficient lubricating oil or failure of the lubrication system.
Solution: Check the level of lubricating oil and replenish the lubricating oil. Ensure that the lubrication system is functioning properly.
7.Pump drive malfunction:
Cause: Failure of the motor or other drive unit that drives the pump.
Solution: Inspect the drive unit and repair or replace the faulty component. Ensure that the drive system is functioning properly.
8.Overheating:
Cause: The temperature of the liquid is too high or the cooling system is failing.
Solution: Reduce the temperature of the liquid, repair or replace the cooling system.
9.Abnormal system pressure:
Cause: Too high or too low system pressure.
Solution: Adjust the system pressure to a normal level to ensure that it is within the design range.
Timely maintenance and regular inspections are essential to prevent the cause of gear pump stopping. When there is a problem, take corresponding measures according to the specific situation to ensure the stable operation of the gear pump.