A submarine protection interlocking block soft row mould comprises the following characteristics: the ratio of the length of a single block to the thickness of the interlocking block is not less than 45. The ratio of the width of a single block to the thickness is not less than 3. In the process of operation, the subsea protection interlocking block soft row mold needs to be processed according to the steps, and after the subsea protection interlocking block soft body row mold is processed, whether it is a steel mold or a plastic mold, it needs to be produced according to the actual situation. Once it is found that the subsea protection interlocking block soft body row mold is damaged, whether it is a steel mold or a plastic mold, it is necessary to communicate with the construction manufacturer in time.
The material comparison of the submarine protection interlocking block soft row mold is mainly for the production materials, and what are the benefits of their use. Steel molds are stiffer than plastic molds, while plastic molds have a lower expenditure cost. When machining with molds, the plastic molds take less time, and the surface of the interlocking blocks of the processed concrete soft body row is very smooth.
The smoothness of the interlocking block is inseparable from the subsea protection interlocking block soft row mold, and the service life of the subsea protection interlocking block soft row die is usually more than 2 years. The longer the service life, the lower the production cost.