The spark plug is a key component of the engine, and once the flame is turned off, it will have an impact on the operation of the engine. In view of the problem of spark plug stalling of Carter's gas engine, we need to analyze and troubleshoot from the following aspects.
First of all, we want to check if the spark plug itself is normal. You can use a special spark plug disassembly machine to remove the spark plug and observe whether its appearance is damaged, whether the electrode gap is normal, whether there are cracks in the ceramic part, etc. If an abnormality is found, a new spark plug needs to be replaced.
Secondly, it is necessary to check whether the ignition coil is normal. The ignition coil is a device that converts low voltage into high voltage, and if the ignition coil fails, it will cause insufficient ignition energy, which will cause the spark plug to stall. The resistance of the ignition coil can be measured to determine whether it is normal.
In addition, it is necessary to check whether the ignition sequence of the engine is correct. If the ignition sequence is incorrect, it may cause the spark plug to fail to ignite the mixture properly, resulting in flameout. You can check whether it is normal by looking at the ignition sequence table of the engine or by measuring the ignition signal of the engine.
To sum up, in view of the problem of spark plug stalling of Cater's gas engine, we need to check and troubleshoot from the aspects of spark plug, ignition coil, ignition sequence and control unit. Only by finding the root cause of the problem can we effectively solve the problem of spark plug stalling and ensure the normal operation of the engine. At the same time, in daily use, it is also necessary to regularly inspect and maintain the engine, find and solve problems in time, and avoid major failures caused by small problems.