The KUKA robot teach pendant cannot be repaired in the system
A hardware issue prevents the KUKA Robot Teach Pendant display from entering the system.
1. Hardware failure.
Hardware failure is one of the common reasons why the KUKA robot teach pendant display cannot enter the system, which may be caused by hardware failures such as CPUs, memory modules, and hard disks. If the hardware fails, the KUKA robot teach pendant display may have the following conditions: black screen, blue screen, freeze, etc. Workaround: Replace the problematic hardware.
2 Improper unplugging.
Improper unplugging and unplugging may also cause the KUKA Robot Teach Pendant display to be unable to enter the system, which may be caused by a loose or loose hardware connection. If it is not plugged or unplugged incorrectly, the display of the KUKA robot teach pendant may not start, and the screen display may be abnormal. Workaround: Check if the hardware is connected correctly, reconnect or replace the problematic hardware.
2. Driver problems cause the KUKA robot teach pendant display to fail to enter the system.
1 Driver corruption.
Corrupted drivers are also one of the common reasons that cause the KUKA robot teach pendant display to not enter the system, which can be due to virus infection, system upgrade, etc. If the driver is corrupted, the Siemens teach pendant display may not boot, the screen may not be displayed properly, etc. Workaround: You can use the System Recovery feature or reinstall the driver.
2 Driver Upgrades.
Driver upgrades may also cause the KUKA Robot Teach Pendant display to not be able to enter the system, which may be due to incompatibility with other software or hardware after the upgrade. If the driver cannot enter the system after upgrading, the KUKA robot teach pendant display may fail to start, and the screen display may be abnormal. Workaround: Uninstall the incompatible driver or restore the previous driver version.