Liquid nitrogen biocontainer YDS-10 is a cryogenic container for storing biological samples, with excellent low-temperature performance and storage capacity. The following is the detailed operation of the liquid nitrogen biocontainer YDS-10:
1. Prepare before use.
Before using the liquid nitrogen biocontainer YDS-10, the following preparations are required:
1.Check the appearance of the container: Make sure the container is not visibly damaged or cracked to ensure that it can safely store the sample.
2.Cleaning the container: Wash the inside and outside of the liquid nitrogen biocontainer YDS-10 with an appropriate detergent to ensure the cleanliness of the inside of the container.
3.Check for liquid nitrogen**: Make sure there is enough liquid nitrogen** to meet the needs of storing your sample.
2. Add samples.
After preparing the container, you can start adding samples:
1.Open the lid of the container and carefully place the sample into the container. Be careful not to stack too many samples on top of each other so that they don't collide or overlap each other.
2.Close the lid of the container and make sure it is well sealed.
3.Liquid nitrogen is added to the vessel to ensure that the sample can be maintained at the desired low temperatures.
3. Storage management.
After the sample is added, it needs to be stored and managed:
1.Check the tightness of the container regularly: make sure the lid of the container is tightly closed and there are no leaks. If a leak is found, it should be treated promptly to prevent the loss of liquid nitrogen and the increase in sample temperature.
2.Regular replenishment of liquid nitrogen: Due to the volatilization of liquid nitrogen, the amount of liquid nitrogen needs to be checked regularly and replenished in a timely manner. If liquid nitrogen is insufficient, it should be replaced in time to ensure that the sample can be kept at low temperatures.
3.Monitor the temperature regularly: To ensure the safety of the sample, the temperature of the stored sample needs to be monitored regularly. If an abnormally high temperature is found, it should be treated promptly to prevent damage to the sample.
4. Precautions.
When using the liquid nitrogen biocontainer YDS-10, the following should be noted:
1.Avoid open flames and high temperatures: Liquid nitrogen is a low-temperature fluid that can occur when exposed to open flames or high temperatures**. Therefore, exposing the container to open flames or high temperatures should be avoided.
2.Avoid severe shaking: Severe shaking may cause damage to the container or breakage of the sample. Therefore, excessive vibration and impact should be avoided during use and handling.
3.Follow the operating procedures: When using the liquid nitrogen biocontainer YDS-10, the operating procedures should be followed to ensure safety and reliability.