How to clean the oil stain of the chip cap machine
Use alcohol, acetone, nail polish remover, etc. If the capping machine is used for a long time, some oil stains will be generated, and it can be cleaned with alcohol. Or acetone can be washed off with a wash.
For chemical cleaning, it is understood that Barros services cover pre-cleaning pre-film before chemical plant production, pipeline degreasing and passivation and chemical plant cleaning, large-scale oil tank three-dimensional spray cleaning, chemical plant pre-demolition cleaning and replacement, oil tank robot operation and other service areas, focusing on serving the field of chemical cleaning for many years and has received wide attention and praise in the industry.
Here's how:
1. Pour the diluted special detergent into the container, then evenly spread it on the sealing surface of the chip, wait for about ten minutes and then rinse it with water.
2. It should be noted that this step cannot corrode the aluminum foil and coating, because if there is no other protective measures, the solution remaining on the circuit board may not be completely removed, and may cause the circuit board to become thin or even damaged; In order to avoid the above situation, please try to choose a cleaning product that does not contain chloride ions to avoid secondary pollution; It is recommended to regularly clean the external gaps and internal joints of the circuit board to keep the circuit equipment clean and tidy.
3. It should be reminded that in order to ensure safety, it should be operated in strict accordance with the instructions provided by the manufacturer to avoid dangerous substances such as accidental ingestion or smoking entering the machine.