Fluorocarbon paint, this is a powerful coating, weathering, corrosion, chemical attack resistance is very strong. When constructing, you have to follow these steps:
1.Surface preparation: clean the construction surface and wipe off the oil, rust spots, old paint, etc. The metal surface should be sandblasted or sanded so that the coating sticks more firmly.
2.Brush primer: In order to make the fluorocarbon paint stick more firmly and the anti-corrosion effect is better, first brush a layer of primer. The choice of primer depends on the nature of the substrate and the environment in which it is used.
3.Fluorocarbon paint: When applying, choose the right method, such as brush, roller or spray. The paint film should be applied evenly to avoid problems such as sagging and bubbles. The thickness of the paint layer is controlled according to the product manual.
4.Drying and curing: After coating, let the paint layer dry and cure properly. The length of time depends on the type of paint, the thickness of the paint layer, and the environment you are in. During the drying process, do not let rain and dust get on it.
5.Check and repair: After painting, check the paint layer and repair the problem in time.
6.Varnish protection: In order to make fluorocarbon paint more weather-resistant and wear-resistant, a second layer of varnish protection can be applied to the surface.
These are the basic steps of fluorocarbon paint construction, the actual operation may vary depending on the type of product and the construction environment, you can refer to the product manual or consult professionals.