In today's multi-leading era, people's demand for home audio-visual entertainment is getting higher and higher. Hisense TV is a well-known TV brand in China,Its high-definition picture quality and excellent sound effect are deeply loved by consumers。 However,Sometimes we need to connect the audio output interface of Hisense TV to the speaker,Get a more shocking sound experience。 So,How to connect the audio output interface of Hisense TV with the audio? This article will introduce it to you in detail.
1、Understand the type of Hisense TV audio output interface。
Before connecting the audio output interface of Hisense TV and the audio,We need to understand the type of audio output interface supported by Hisense TV。 At present,Hisense TV mainly provides the following audio output interfaces:
1.Analog audio interface (3.)5mm headphone jack): This interface is the most common audio output interface, it supports left and right channel output, which can meet the needs of general home audio.
2.S PDIF Digital Audio Interface: This interface can provide better audio transmission, supporting audio formats including Dolby Digital, DTS, etc.
3.HDMI interface: HDMI interface can not only transmit ** signal, but also support audio transmission. By connecting the TV to the speaker via an HDMI cable, high-quality audio transmission can be realized.
2. Choose the appropriate cable and interface.
According to the type of interface between Hisense TV and audio,We need to choose the right cable。 Common cables include:
1. 3.5mm to 35mm audio cable: used to connect the TV's analog audio interface to the speaker's analog audio input.
2.S PDIF Digital Audio Cable: Used to connect the TV's S PDIF digital audio interface to the speaker's S PDIF digital input.
3.HDMI cable: used to connect the HDMI interface of the TV with the HDMI input port of the audio, to achieve synchronous transmission with audio.
3. Connection steps.
Once we know the interface type and the cables, we can start making the connection. Here are the steps to connect:
1.Prepare the required cables and interfaces;
2.Insert the two ends of the cable into the corresponding interface of Hisense TV and audio;
3.Make sure the cable is plugged in tightly to avoid bad contact affecting the sound quality;
4.Turn on Hisense TV and stereo,Check whether the audio output is normal。
4. Common problems and solutions.
During the connection process, you may encounter some issues. The following are common problems and solutions:
1.The TV and the speaker cannot be connected normally: please check whether the connection cable is in good condition and whether the interface is plugged in tightly; Try to replace the other cables; Check whether the interface between the TV and the speaker is normal.
2.The audio output is abnormal: Please check whether the cable is in good condition; Check whether the volume settings of the TV and stereo are correct; Try replacing the audio output connector or cable.
3.Stereo effect cannot be achieved: Please make sure the cable is plugged in tightly to avoid poor contact; Check whether the audio settings of the TV and stereo are correct; Try replacing the audio output connector or cable.
Through the above steps,You should be able to smoothly connect the audio output interface of Hisense TV to the speaker,Enjoy a more shocking sound experience。 It should be noted that different audio equipment may have different requirements for audio input, please refer to the manual of the audio equipment for specific operation.