The adjustment method of Gree air energy temperature controller is as follows:
1.Select key: When you click this key after powering on, select and enter the corresponding working mode in the order of "Instant - Appointment - Medium Temperature". However, if you do not set a scheduled start-up time (that is, the value is 00), you cannot select the reservation method.
2.Instant heating: the controller immediately energizes the electric heating pipe to heat the water, when the heating reaches the set temperature, the power supply of the electric heating pipe is cut off, and the water temperature drops to 10 below the set temperature and starts to energize the electric heating pipe, so that the circulating heating controls the temperature within a certain range.
3.Scheduled start-up: When the clock goes to the timed start-up time, the controller will electrify the electric heating pipe to heat the water, and after heating to the set temperature, it will exit the heating and heat preservation state. If you do not withdraw from this work arrangement, the appointment will remain valid for the next day.
4.Medium temperature insulation: the controller immediately electrifies the electric heating pipe to heat the water, and when it heats to 50, it cuts off the power supply of the electric heating pipe, and when the water temperature drops to 45, it begins to energize the electric heating pipe to heat the water, and so on. If you do not opt out of the work style, the work method will remain in effect.
5.Adjustment knob: When the knob is pressed after powering on, it will enter the water temperature setting state, and when pressed again, it will enter the appointment time setting state; When the water temperature is set in the state of the reservation time, turn the adjustment knob clockwise or counterclockwise to set the heating water temperature and reserve the start time.