If you can't charge your iPad properly, then no matter how high-end your iPad is, it won't be able to function as it should. Luckily, most of the time, you won't have problems charging your device.
But what if your iPad won't charge properly? Don't worry, here are a few solutions you can try.
Check the charging cable.
When you find that your iPad won't charge properly, the problem is often on the top of the charging cable. Even though Apple's cables are of pretty good quality, they can still get damaged if you move them around a lot.
After connecting your iPad, try gently shaking the cord and see if it starts charging in a different position. If that doesn't work, try replacing another charging cable if you have one.
If not, try charging other devices with the same charging cable and see if it works. Through these ways, you will be able to determine if there is a problem with the charging cable and if you need to replace it with a new one.
Use the correct charger.
In addition to the charging cable, the charger can also be the cause of the iPad not charging properly.
First of all, make sure that you are using a good quality charger. It doesn't have to be an original Apple charger, but it must be a high-quality charger that is USB certified to ensure that it doesn't pose a danger to your iPad or yourself.
At the same time, you need to make sure that you are using the correct voltage. The charger you use should be at least 10-12W, but higher wattage is better. Using a 5W charger is not enough to fully charge a large device like an iPad.
Restart your iPad
This may sound a bit cliché, but turning off and restarting your iPad does work and sometimes even fixes the charging issue.
For iPads with Face ID, you can restart it by pressing and holding the top button and one of the volume buttons for a few seconds.
For iPads with Touch ID, all you have to do is press and hold the top button for a few seconds. Slide the slider to the right to turn off your iPad. After waiting for about 30 seconds, turn on your iPad again. Finally, try charging your iPad and see if the problem is resolved.
Only at the proper room temperature can your iPad charge properly. This means that if the weather is too hot or too cold, your iPad will automatically stop charging until it returns to a more suitable temperature.
The suitable temperature range for charging devices and batteries should be between 0°C and 35°C. Outside of this range, your device may not charge or work properly.
Also, if your iPad overheats while charging, it may damage the battery in the long run. Therefore, it is best to charge your iPad in a room with a suitable temperature.
Also, avoid exposing your iPad to direct sunlight. It's also worth noting that avoid using your iPad while it's charging. This includes movies or web browsing. Don't disturb it while charging it to avoid overheating and causing random stopping of charging.
Making sure your iPad is up to date is an important part of keeping it up to date. Although unlikely, your iPad may still not charge properly due to a software issue.
If so, you're probably not the only one experiencing this issue. Apple may have looked into and fixed this issue. Therefore, it is very important to keep your iPad's software updated.
You can check for and install any available updates by following these steps:
Open".Settings"Applications;
Scroll the left sidebar and click ".General
Go to".Software Updates
If an update is available, tap ".Update now
Wait for your iPad to finish updating and try charging again.
You can also enable Automatic Updates and make sure iPadOS Update is turned on so that your iPad automatically installs future updates.
Most people should clean their iPad's USB-C port more often. If too much dust or debris accumulates on the port, it may cause the charging cable to not fully charge your iPad, even if it is plugged in properly.
Be sure to clean the charging port before buying a new charging cable. The same applies if you're using an iPad with Magic Keyboard.
Turn off your iPad when cleaning and be careful not to use any liquid to clean the ports. Instead, you can use a soft, dry cloth to remove any debris you may find.
After cleaning the port, try charging your iPad again and see if it works.
Apple Store. If none of the above methods work, then the only way to seek help is to seek professional help.
If you can't get your iPad back to charging properly, be sure to contact Apple Support and ask them to check your device. They may find an effective way to solve the problem.
You can ask for help through Apple's official website or a nearby Apple store.
In the complex digital world, we sift through the most valuable information for you and provide you with the most practical tips. Every click, every share, is the driving force for us to move forward. Your 【AttentionIt is the source of power for us to continue to explore and make progress.