Friends, are you ready to give your new home a "floor heating surprise"? Worried about underfloor heating installation stepping on pits? The old driver of Huashang HVAC decoration came to solve his worries! In the matter of floor heating, Xiaohua has 26 years of experience to ensure that you have no misses to "pretend" a comfortable nest! Don't say much, go straight to the dry goods!
1.Ground treatment.
Let's start from the beginning, the foundation treatment should be sufficient, other debris should be cleaned up, the cement floor should be polished and smoothed, and the mortar floor should be fully waterproofed, so as not to delay the construction process due to ground leakage in the later stage.
2.Attach the "Boundary Insulation Strip".
Insulation strips are pasted around the perimeter to prevent heat loss from the corners of the wall, and take into account the problem of cement expansion. Attention should be paid to overlapping at the splicing place to enhance the insulation protection effect.
3.Laying of "insulation".
Lay the insulation board first, and then lay the reflective film. The insulation board can "lock" the heat of the floor heating to prevent it from "running" downward, and the reflective film will "push" the heat in reverse, so that the upper layer is heated more evenly. "Stack buffs" and you're done!
4.Underfloor heating pipes are laid.
The all-important underfloor heating plumbing is about to begin! Each pipe must be intact, and the corners must be drop-shaped to prevent breakage. The spacing is controlled at 15-20 cm, which not only saves costs, but also ensures that the heat is fully conducted. There is no pipe under the custom cabinet.
5.Constant pressure observation.
The first stress test to 08MPa, if the pressure drop does not exceed 0 within 48 hours05MPa, indicating that the floor heating system is tightly fitted, and you can continue the construction patiently!
6.Three-material backfilling.
Cement + sand + bean stone backfill 1-2 cm in a ratio of 1:2:3, not too thick, not too thin, firmly wrap the pipe, and the heat can be evenly conducted to the ground.
The above 6 points are the hurdles that must be passed through for floor heating decoration! If you have any other questions on the decoration road, please leave a message for consultation!