The oil dripping situation of the range hood is as follows.
1. If the height of the range hood is not suitable, there will be oil dripping. If the range hood drips, it may be the reason why the installation height of the range hood is not suitable.
2. If the range hood is old, the motor and turbine may be stuck to the oil, causing the range hood to drip oil.
3. If the air pressure in the kitchen is unstable. It is likely that the range hood will not be able to absorb the range hood properly. There is a situation where the range hood drips oil.
4. If the range hood is disassembled without authorization, it is likely that the smoking ability of the range hood will be poor after assembly.
Second, the range hood drip treatment method.
The reason for the dripping oil of the range hood is generally that the oil is full, or the installation is improper, etc., which can be dealt with according to the following methods:
1. The range hood should ensure a certain installation height, which can not only ensure that it does not meet, but also ensure the effect of range smoke.
2. In order to avoid the occurrence of oil dripping phenomenon of the range hood, the range hood should be cleaned regularly to avoid too much oil sticking to the inner surface of the motor, turbine and range hood.
3. When using the range hood, it is necessary to maintain the circulation of air in the kitchen, which can prevent the air in the kitchen from forming negative pressure and ensure the suction capacity of the range hood.
3. Cleaning method of range hood.
1. Direct cleaning method.
Prepare a dry and wet rag and a bottle of special range hood cleaner. First, turn on the hood, spray the hood cleaner on the inner wall, and then wipe the inner wall with a rag.
2. Hair dryer heating method.
Turn on the hot air with a hair dryer for half a minute, then stick some detergent with a scouring pad and wipe the greasy area. After the oil is blown by the hot air of the hair dryer, it softens a lot, and it is easy to wipe. The grease can be easily wiped off, and all corners can be cleaned.
3. Spraying method of plastic bottles.
Fill the plastic bottle with an appropriate amount of dish soap, fill it with warm water and shake it well, and make a small hole in the bottle mouth. Then turn on the range hood and spray the dish soap on the place that needs to be cleaned, and you can see the sewage flowing into the oil storage hopper and emptying it when it is full.
Range hood recommended.
Sentai B929BQL, 28M min air volume 1000Pa maximum static pressure Variable frequency cruise supercharging 55dB noise. Sentai is equipped with a Zhifeng chip, which automatically senses all kinds of flue pressure, and when it is strong, it is strong, and the suction power of the smoke machine is automatically adjusted with the flue pressure, and the large suction power is released for a long time.
Three-dimensional air inlet system, bottom-mounted three-outlet multi-dimensional smoke purification system, strong straight exhaust does not run smoke. The double air vent design on the top can suck up all the escaped smoke. Dive into the air inlet, suck the fume at the source of the smoke, and reduce the escape of the fume. 16 adjustable air volumes to meet the amount of oil smoke generated by different cooking.
The above is my answer, I hope it can help you, if you think Komori writes attentively and is useful to you, you may wish to like and pay attention to it, Sentai Electric, enjoy life!