As a commonly used filtration equipment, filter presses are widely used in various industries. The method of operation varies depending on the model and use, but the general steps are similar. The following is the general operation method of the filter press:
1. Check before the filter press is opened.
Before the filter press is turned on, its individual components need to be inspected to ensure that it is normal and safe. Inspections include:
1.Check whether the filter cloth is damaged or blocked, and replace or clean it in time if so;
2.Check whether the hydraulic system is normal, whether the oil volume in the oil tank is sufficient, and whether the oil pump is working normally;
3.Check whether the electrical system is normal, including power supply, motor, control circuit, etc.;
4.Check whether the connecting parts are firm and have no loosening or falling off;
5.Check whether the overall structure of the filter press is intact and there is no serious wear or deformation.
Second, the opening of the filter press.
After making sure that the parts of the filter press are in order, you can start starting the equipment. Attention should be paid when starting:
1.First open the hydraulic system, make the oil pump start to work, and check whether the oil circuit is normal;
2.Turn on the electrical system and check whether the motor and control lines are working properly;
3.Turn on the feed pump of the filter press to make the material enter the filter chamber of the filter press;
4.Adjust the parameters of the filter press, including pressure, flow, temperature, etc., to meet the process requirements.
3. Operation of filter press.
During the normal operation of the filter press, it needs to be monitored and adjusted to ensure its normal operation. Monitoring includes:
1.Monitor the pressure, flow, temperature and other parameters of the filter press to ensure that it meets the process requirements;
2.Check the filtration effect of the filter cloth, and clean or replace it in time if it is found to be blocked or damaged;
3.Regularly check the operation of the hydraulic system and electrical system, and deal with it in time if there is any abnormality;
4.Monitor the working status of the feed pump to ensure that it is feeding normally.
Depending on the requirements of different industries and different production processes, the operation method of the filter press may be different. In actual operation, the operation should be carried out in strict accordance with the equipment instruction manual and operating procedures to ensure that the filtration work is completed safely and efficiently. At the same time, it is also necessary to pay attention to the maintenance and maintenance of the equipment to prolong the service life of the equipment.