There may be the following reasons why the filter press pull plate does not work:
1.The delay setting of the return delay of the main pull plate is too long: When the main pull plate of the filter press returns, if the setting time is too long, the return action of the pull plate will not be executed normally. At this time, it is necessary to check the return delay setting of the main pull plate and shorten the delay time appropriately to ensure that the pull plate can return normally.
2.The distance between the main pull plate return proximity switch and the proximity switch bracket is too large: If the distance between the main pull plate return proximity switch and the proximity switch bracket is too large, the proximity switch will not be able to sense the movement of the pull plate, thus affecting the normal return of the pull plate. At this time, it is necessary to adjust the distance between the return proximity switch and the proximity switch bracket of the main pull plate to ensure that it can sense the movement of the pull plate normally.
3.If there is dust or other obstacles between the sensing surface of the proximity switch and the sensing lamp returned to the main pull plate: If there is dust or other obstacles between the sensing surface of the proximity switch and the sensing lamp returned by the main pull plate, the sensing effect of the proximity switch will be affected, resulting in the failure of the pull plate to return normally. In this case, dust and other obstructions between the sensing surface of the proximity switch and the sensor light need to be cleaned to ensure that it can function properly.
4.The main pull plate drive motor is damaged: If the main pull plate drive motor is damaged, the pull plate will not be able to perform the return action normally. At this time, it is necessary to check the status of the main pull plate drive motor, and replace it in time if it is damaged.
5.Other electrical or mechanical failures: In addition to the above reasons, other electrical or mechanical faults may also cause the filter press pull plate to not function. At this point, the electrical and mechanical systems of the filter press need to be thoroughly inspected to find the fault and take appropriate measures to repair it.
To sum up, in order to solve the problem that the pull plate of the filter press does not move, corresponding measures need to be taken for different reasons to adjust and repair. At the same time, in order to ensure the normal operation of the filter press, it is also necessary to regularly maintain and maintain the equipment, and find and solve potential faults in time.