The file Windows System32 WinLoad. appears when the computer is turned onWhat about exe?
Restoring your PC device needs to be repaired.
The application or operating system could not be loaded because the required files were missing or contained errors.
File: Windows System32 Winloadexe
Error: 0xc000000e
You need to use a recovery tool. If you don't have any installation media, such as a disc or use device, contact your PC administrator or PC device manufacturer.
Press Enter to try again Press F8 to specify the startup settings.
When Windows 10 prompts WinLoadThe exe is missing or corrupted and the system cannot be loaded properly.
winload.The full name of EXE is Windows Boot Loader, which is a Windows system loader, which is started by the BootMGR protocol, and it is a boot manager in Windows 10 and Windows 7. winload.The job of the EXE is to load the necessary device drivers, as well as the core part of Windows ntoskrnlexe。But in older Windows operating systems, such as Windows XP systems, NTOSKRNLThe loading of the exe is done by NTLDR, which also acts as a boot manager.
If winloadThe exe is corrupted or missing, the user will not be able to boot the Windows tablet, laptop, or desktop, and there may be a "Failed to load application or operating system due to the missing or containing required files." File: Windows System32 Winloadexe。Error**: 0xc000000f" error message.
When winloadIf you have saved important files in your Windows computer, you can use the USB flash drive startup tool to enter the PE system to save the backup C disk and desktop files, and transfer or restore the important data before solving this blue screen problem.
winload.How to fix the missing or corrupted exe?
1. Perform the startup repair.
The boot repair feature in the Windows Recovery Environment can fix issues that prevent Windows from loading, replacing lost or corrupted files. So you can try to fix winload by launching the repair functionMissing or corrupted exe. Here are the detailed steps to perform the startup repair:
Step 1: Insert the Windows 10 installation disk (** or USB flash drive) into your computer. When booting up, continuously click F2 or F10 or Del or ESC shortcut keys (varies depending on the computer brand) to enter the BIOS settings interface, set the first position of the boot sequence to the Windows installation disk, then save the settings, make the computer boot from the installation disk, and select the [Repair Computer] option in the "Install Now" interface of the Windows installer to enter the recovery environment.
Step 2: After entering the recovery environment, select [Troubleshooting], > [Advanced Options], > [Start Repair]. After waiting for the Windows startup repair to complete, restart your computer to see if the issue is resolved.
2. Use the bootrec command to reconstruct the boot configuration data.
The bootrec command can help resolve Windows boot issues by repairing corrupted master boot records or boot configuration data files. This method requires entering the recovery environment before proceeding. The steps are as follows:
Step 1: Press the power button to power on, and press and hold the power button to force it to shut down when the boot logo appears. This step is repeated three times to allow the computer to boot up completely, select [Advanced Options] in the "Automatic Repair" interface, and the computer will enter the Windows recovery environment. Or use the Windows installation disk to boot the computer, you need to set the Windows installation disk in the BIOS settings to the first place in the boot sequence, then save the settings and restart the computer, and select the [Repair Computer] option in the "Install Now" interface of the Windows installer to enter the recovery environment. (Click here to learn how to make a Windows installation disk).
Step 2: After entering the recovery environment, select [Troubleshooting], >then [Advanced Options> [Command Prompt].
Step 3: In the command prompt window that opens, type bootrecexe rebuildbcd], press the [enter] key. In the command line, you may see it say "Total Windows Installations Recognized: 1" or "Total Windows Installs Recognized: 0". If the total number of Windows installations is 0, then skip to step 5.
Step 4: When the "Total number of Windows installations recognized: 1" appears, you have to manually delete the BCD storage before you can start the rebuild. On the command line, enter bcdedit export c: bcdbackup, and then press enter.
Step 5: Then you need to adjust several file attributes of the BCD storage so that you can manipulate it. Please enter [attrib c: boot bcd -h -r -s] (-h refers to remove hidden file attributes, -r refers to remove read-only file attributes, and -s refers to clear system file attributes), and then press [enter] key.
Step 6: Now you need to rename the bcd store, please enter [ren c: boot bcd bcd.].old] command.
Step 7: After that, type [Bootrec RebuildBCD] and press the [Enter] key to start rebuilding BCD. Then click on the Add installation to boot list?"Add the installation to the startup list? ), type y, and press enter. Finally, restart your computer.
3. Reinstall Windows 10
If the above methods do not solve the problem, then you can consider reinstalling the system. Reinstalling the system can solve a lot of Windows blue screen or startup problems, but this method may lose some data from your computer, so before reinstalling Windows 10, it is recommended that you refer to the methods in the second part of this article to transfer important files from your computer. Let's reinstall Windows 10 with the Reset PC feature in the Windows Recovery Environment, and the specific steps are as follows:
Step 1: Enter the Windows Recovery Environment first. Here are two ways to do it.
Method 1: Power on the computer, then press and hold the power button to turn it off when the computer brand logo appears, repeat this step three times, then allow the computer to boot up completely, select [Advanced Options] on the "Automatic Repair" interface, and the computer will enter the Windows recovery environment.
Method 2: Insert the Windows 10 installation disk (** or USB flash drive) into the computer. When booting up, continuously click F2 or F10 or Del or ESC shortcut keys (varies depending on the computer brand) to enter the BIOS settings interface, set the first position of the boot sequence to the Windows installation disk, then save the settings, make the computer boot from the installation disk, and select the [Repair Computer] option in the "Install Now" interface of the Windows installer to enter the recovery environment.
Step 2: Then when "Choose an option" appears, tap [Troubleshoot] - [Reset this PC] in order. The Reset PC feature allows users to keep or delete personal files and then reinstall Windows.
Step 3: Next, select "Keep My Files" or "Delete Everything". If you're planning to give away or gift your device, select Delete Everything, as this will overwrite all the data on the drive, and there is little chance of recovering data in the future.
Step 4: After the computer restarts automatically, click on the "Account Name". Then enter your account password (you don't need to enter it if you don't have one) and click Continue.
Step 5: After confirming the reset information, click Reset. The computer will automatically reboot and initialize the system, which may take a long time, so please be patient.
Tips: Reinstalling Windows 10 can also be done through Windows installation media, but before installation, it is recommended that you back up important files in your computer to avoid losing important data.
The "Recovery" interface appears in the win10 system, and the error ** "0xc00000e".
Method. 1. Disconnect the external device, 0xc000000e error may be due to hardware failure or incompatibility. To check if this is the cause, you can first disconnect the nearest external device from your computer.
In addition, unplug the storage devices on the computer or host computer, such as USB flash drives, card readers, CDs, **, etc.
Then restart your computer and see if the problem is resolved. If it doesn't work out, let's go deeper into troubleshooting below.
Method. 2. Reconstruct the boot configuration data.
Boot Configuration Data (BCD) stores the key settings and options needed to boot up your Windows PC. If a BCD is lost, corrupted, or misconfigured, a 0xc000000e error occurs.
If this is the cause of your problem, the easiest way to fix it is to rebuild the boot configuration data.
1. You need a bootable USB flash drive, plug it in and start the computer.
2. Before the Windows logo appears, press the F12 key again to enter the boot options menu.
The key to access the boot menu may vary from computer to computer, usually ESC, F8 or F12. )
3. Use the down arrow keys to select USB, CD or *** as the boot device, and press enter.
4. Select the language, time and input method, and click"Next".
5. Click "Repair Your Computer".
6. In the "Select an option" interface, click "Troubleshooting".