How to use dual voltage brake 380v and 220v electric hydraulic thruster.
1. Product Overview.
Dual voltage brake 380V and 220V electric hydraulic thruster is an efficient, safe and reliable braking equipment, which is widely used in the braking field of various mechanical equipment. The product uses an electric hydraulic thruster as the power source, which has the advantages of fast braking, smooth stopping, safety and reliability, etc., and is an ideal choice in the field of modern industrial braking.
Second, how to use.
1.Voltage selection.
Before using a dual-voltage brake, you first need to select the appropriate voltage level according to the supply voltage. If the power supply voltage is 380V, please adjust the voltage level to 380V; If the power supply voltage is 220V, adjust the voltage level to 220V. Do not use at a voltage other than the specified voltage to avoid damage to the device.
2.Installation and connection.
Install the dual-voltage brake on the part where braking is required, and make sure it is firmly fixed. Then, according to the wiring requirements of the brake, connect the power and signal lines correctly. During the connection process, it is important to ensure that the wiring is secure to prevent problems such as poor contact or short circuit.
3.Pre-run checks.
A full inspection is required before running a dual-voltage brake. The checks include: confirming that the power supply voltage is consistent with the selected gear; Check whether there is any abnormality in each part of the brake; Check whether the oil level is normal; Check whether the oil circuit is unblocked, etc. If there is any abnormality, it should be dealt with in time to ensure the normal operation of the brake.
4.Run the action.
When running the dual-voltage brake, the hydraulic thruster should be started first, and then the braking torque of the brake should be gradually adjusted after the oil pressure is stable. During the adjustment process, the change of braking torque should be closely paid to ensure that it meets the requirements of the equipment. At the same time, the brake should be kept clean and the hydraulic oil should be changed regularly to ensure that it is in good working condition.
5.Maintenance & Maintenance.
The maintenance and maintenance of a dual-voltage brake is critical to its longevity and performance. The quality and oil level of hydraulic oil should be checked regularly, and if there is any abnormality, it should be replaced or replenished in time. At the same time, dust and debris on the surface of the brake should be cleaned regularly to keep its appearance neat and tidy. During prolonged outbreaks, the brake should be stored in a dry, ventilated place to prevent it from getting moisture or damage.
3. Precautions.
1.When using dual-voltage brakes, the operating procedures should be strictly followed to ensure the safety of the operation process. Non-professionals are not allowed to disassemble, repair or modify the brakes at will to avoid damage to the equipment or personal injury.
2.During installation and use, it should be ensured that the dual-voltage brake is well grounded to prevent leakage of the equipment or accidental electric shock accidents. At the same time, the grounding wire should be checked regularly to see if it is firm and reliable.
3.In the process of use, if it is found that the dual-voltage brake has abnormal sound or vibration, abnormal temperature rise, unstable oil pressure and other problems, it should be stopped in time to check and eliminate the fault. If necessary, contact a professional for repairs.