Haier zero cold water gas water heater is one of the Haier water heaters, its biggest feature is to achieve zero cold water, that is, you can use hot water directly when you open the faucet, without waiting for the cold water in the hot water pipe to flow out. The use of Haier zero cold water gas water heater needs to follow certain steps, and the following is a detailed introduction to how to use Haier zero cold water gas water heater.
1. Installation and connection.
First of all, you need to make sure that the Haier Zero Cold Water Gas Water Heater has been installed and connected to the gas pipeline and power supply. The installation location should be selected in a well-ventilated and easy-to-operate place, and avoid being installed in a closed cabinet or a humid place, so as not to affect the normal operation and safety of the water heater. When connecting the power supply and gas pipes, it is necessary to ask a professional to operate it to ensure safety and reliability.
Second, the first use.
When using a Haier Zero Cold Water Gas Water Heater for the first time, it is necessary to vent the water first. Open the water heater's inlet valve and let the water flow inside the water heater until the water flows out of the drain. Then close the inlet valve, open the hot water valve, and let the hot water flow out of the water heater until clear hot water comes out of the faucet. At this point, it means that the water heater is working normally and can be operated normally.
3. Steps.
1.Turn on the power switch, press the power button on the control panel, and the water heater starts to work normally.
2.The desired temperature is set by the temperature adjustment button on the control panel, which is generally recommended to be set between 40 -50. If a higher temperature is required, the temperature setpoint can be slightly increased. It should be noted that the maximum temperature of the water heater should not exceed 70 to avoid damage to the internal parts of the water heater.
3.When you need to use hot water, you just need to turn on the faucet, and the water heater will automatically start and start working, and after waiting for a while, the hot water can flow out. If you need to stop using hot water, just turn off the faucet.
4.If you need to stop using the water heater, you can press the power off button on the control panel and the water heater will turn off automatically.
4. Precautions.
1.When using Haier zero cold water gas water heaters, it is necessary to ensure that the indoor ventilation is good to avoid safety problems such as lack of oxygen during use.
2.Regularly check the gas pipes and connections of the water heater for loose or leaking air, and deal with any abnormalities in time.
3.If the water heater is not in use for a long time, the power and gas valves should be turned off first to avoid unexpected situations.
4.In the process of use, if abnormal situations or fault problems are found, professionals should be contacted in time for maintenance and maintenance.
The above is a detailed introduction on how to use Haier zero cold water gas water heater. With proper installation, connection, operation and precautions, Haier Zero Cold Water Gas Water Heaters can be guaranteed to work properly and perform at their best. If you encounter any problems during use, you can contact Haier after-sales or professional maintenance personnel for processing.