Fault**FC2 usually indicates that some part of the washing machine has malfunctioned or operated incorrectly, causing the washing machine to not function properly. Here are the detailed steps on how to fix the Haier washing machine FC2 failure.
1.Make sure the washing machine is properly connected to an electrical outlet.
2.Check the power cord for damage or looseness.
3.If you find a problem with the power cord, you can replace it with a new one or repair a damaged one.
1.Make sure the washing machine is properly connected to the water source and that the water source** is working.
2.Check that the washing machine inlet pipe is not bent or kinked, causing the water flow to be blocked.
3.If a problem is found with the water source, the water source** can be repaired** or the inlet pipe replaced.
1.Turn off the power to the washing machine and disconnect the power cord.
2.Locate the filter on the bottom of the washing machine, which is usually located at the base at the front of the washing machine.
3.Use a wrench or screwdriver to open the strainer cover.
4.Remove the strainer and wash it to make sure there are no blockages blocking the flow of water.
5.Once the filter is cleaned, put it back in and tighten the filter cover.
1.Turn off the power to the washing machine and disconnect the power cord.
2.Wait a few minutes for the washing machine to cool down for a while.
3.Connect the power to the washing machine again and turn on the power switch.
4.Press the reset button of the washing machine, which is usually located in the control area of the washing machine's panel.
5.Wait for the washing machine to restart and observe if the FC2 error also occurs**.
FC2 error** usually indicates that some part of the Haier washing machine has malfunctioned or operated incorrectly, causing the washing machine to not function properly. This could be caused by a power issue, a water source issue, a clogged filter, or something else. By checking and fixing these problems, the Haier washing machine FC2 fault can be solved.