The range hood is a must-have appliance in the kitchen, and you need to pay attention to its height when installing it. So, what is the standard for the installation height of the range hood?
What is the standard for the installation height of the range hood
1. Chinese range hood: the installation height should be 65 cm to 75 cm away from the table, not too high or too low. Because it is too low, it is easy to meet, and too high will affect the use effect.
2. Top suction range hood: the installation height needs to be 70 cm to 75 cm away from the table, and the specific installation position of the gusset plate should be selected according to its specific size, and the corresponding marks should be made.
3. European-style range hood: the installation height needs to be 65 cm to 75 cm from the table, which can be selected according to its power.
4. Side-draft range hood: the installation height needs to be 35 cm to 40 cm from the countertop, starting from its bottom, and the position needs to be directly above the stove, and the two need to be on the same axis, so as to achieve the corresponding effect.
What to pay attention to when installing a range hood.
1. Determine the installation location.
As we all know, range hoods are installed directly above the stove, because this position can be produced in the shortest possible time to produce the smoke at the fastest speed, especially for the top suction range hood, this position is very important, and the distance between the position and the stove should be controlled, not too far or too close, otherwise it will affect the effect of use.
2. Pay attention to the installation of flue.
When installing the range hood, it is also necessary to pay attention to the installation of the flue, there is a connection between it and the range hood, and this part must be firm, otherwise in the process of use, it is easy to have poor smoke or smoke leakage. After installation, check how secure it is.
Sentai B981BQ (inverter) has a built-in DC inverter motor, cruise boosting, noise reduction treatment. Equipped with a frequency conversion intelligent core, it can perceive the wind resistance of the flue in real time, automatically adjust the wind pressure, and be strong when it is strong, without fear of any smoke exhaust environment. With the copper wire motor, the power of the hood machine is improved and the smoke is sucked out. The 900mm automatic opening and closing of the smoke screen is convenient and improves the smoke collection effect at the same time, effectively reducing the overflow of oil smoke.
Article summary: The above is my sharing, I hope it can help you, if you feel that Komori writes carefully and is useful to you, you may wish to like and pay attention to it, Sentai Electric, enjoy life!