MCGS Kunlun Tongtai touch screen can not start the fault cause analysis and maintenance
1.The battery inside the Kunlun Tongtai touch screen machine is faulty (need to replace the new button battery,).
2.Aging of Kunlun Tongtai touch screen components (check the service life and life of the machine).
3.The PLC link of the touch screen is faulty.
4.The influence of the motherboard and the main power supply on the Kunlun Tongtai touch screen.
What is the reason why the touch screen can not start, the general touch screen has a black screen, a white screen, the touch screen does not respond or the motherboard is damaged, etc., these situations will lead to the phenomenon that the machine can not start, but the performance failure of the machine is different, of course, the direction of maintenance is also different. I once repaired a Kunlun Tongtai touch screen this machine is an old customer of mine chemical factory, when the customer feedback is that the machine can not start normally, after powering on the screen of the machine is sometimes normal bright, sometimes a few days down the start interface is in the same state, there is no response, for this capricious machine is not strange.
Yichun MCGS Kunlun Tongtai touch screen TPC1561HI can not start the fault repair on the same day repair summary: The above is the MCGS Kunlun touch screen can not start the fault of the cause analysis and maintenance method, can better carry out the maintenance of the touch screen fault, if you can not solve your problem, you can send it to the maintenance center for maintenance.