The 10-ton PE water tank is produced by rotational molding process, which has the characteristics of rounded barrel body, complete structure, smooth inside and outside, no welds, no splicing, corrosion resistance, acid and alkali resistance, and long life. The following is an introduction to the characteristics of its storage media:
Corrosion resistance: The 10 ton PE water tank has excellent corrosion resistance to all kinds of acids and alkalis, so it is suitable for storing all kinds of acid and alkali salt chemical liquids.
Clean and beautiful: its appearance is streamlined, not easy to dirt, and can easily remove dirt, ensuring the cleanliness of the storage medium.
Economical and durable: The barrel body is integrally molded without adhesive joints, not easy to break, economical and durable, and reduces maintenance costs.
Heat and frost resistance: It has good heat and frost resistance, and can be used in environments from 80 degrees Celsius to minus 40 degrees Celsius, so it is suitable for liquid storage under various temperature conditions.
Easy handling: Compared with the bulkiness of metal storage tanks, the 10-ton PE water tank is tough, shock-resistant, impact-resistant, and easy to handle, which is also conducive to protecting the storage medium.
Therefore, 10 ton PE water tank is widely used in various industries such as environmental protection water treatment, sewage treatment, chemical industry, electronics, food factory, etc. Please note that due to the large volume of the PE water tank, special attention is required during transportation, and it is recommended to use forklifts or cranes for handling to prevent the water tank from being damaged and affecting the quality and safety of the storage medium.
Secondly, the characteristics of the storage medium of the 10 ton PE water tank:
Nuoshun storage tank grading:
1.Grade A: Indoor water storage;
2.Class B: Drinking water storage, low acid and low alkali for industrial use (increase the thickness on the basis of Class A);
3.Class C: for industrial use with low concentration of strong acid and strong alkali (increase the thickness on the basis of grade B);
4.UL grade: for industrial use with high concentration of strong acid and alkali (increase the thickness on the basis of the special grade).
The use conditions of conventional plastic storage tanks are normal temperature and normal pressure (warm reminder is to use plastic barrels beyond normal temperature, special products need to be customized), and the specific gravity of liquid used in general plastic storage tanks shall not exceed 12。
The 10-ton plastic water tower is mostly used for filling water or acid and alkali liquids with a concentration of less than 30%, and can store solutions with a temperature of less than 60 degrees. It can be customized according to customer requirements, the product can be thickened, more feeding and thicker barrel body, and the conventional service life is 15-20 years.
Plastic water towers with conventional wall thickness are generally used to store pure water, and if the PE plastic water tank plastic water tower stores acid and alkaline chemical liquids, it needs to be properly thickened.
The ordinary all-plastic storage tank has been experimentally verified to be able to hold a concentration of 60% at room temperature; The thickened storage tank can also contain acid, alkali, salt, organic compounds and other liquid substances with a temperature of no more than 80 and a concentration of less than or equal to 90%, except for gasoline, HNO3 with a concentration of more than 35% and alcohol with a concentration of 40%.