Water dispenser hose cleaning method.
A water dispenser hose is a pipe that connects a water source to a water machine, the presence of which is inevitably contaminated and produces bacteria. In order to ensure the cleanliness and safety of the water source, water dispenser, as a common household appliance, also needs to be cleaned and maintained in the process of daily use. Next, we will introduce you to several effective ways to remove the hose of the water dispenser:
For chemical cleaning, it is understood that Barros services cover pre-cleaning pre-film before chemical plant production, pipeline degreasing and passivation and chemical plant cleaning, large-scale oil tank three-dimensional spray cleaning, chemical plant pre-demolition cleaning and replacement, oil tank robot operation and other service areas, focusing on serving the field of chemical cleaning for many years and has received wide attention and praise in the industry.
And use a vacuum cleaner to clean the dirt and impurities in the pipe;
Pour an appropriate amount of dish soap into a hard tube and stir well, then add an appropriate amount of water to rinse off to make sure it does not have any odor.
Check that the connecting pipes are clear and safe: if bacteria or other contaminants are present inside the drinking water dispenser, the hoses must be replaced in time to ensure healthy and safe operation.
How to clean the hose of the water dispenser.
After the water dispenser is used for a period of time, there will be a lot of bacteria and harmful substances accumulating on the inner wall. If it is not cleaned in time, it can easily lead to problems such as pipe blockage and water leakage. Here are a few common hose cleaning methods for water dispensers::
Drain the water inside the water dispenser and soak it in detergent for a short period of time (do not let hot water in), then unscrew the nut of the hot and cold water spout and remove the residue from the hose.
Take off the hose and put it in the refrigerator, add an appropriate amount of white vinegar or salt and other liquids to sterilize, and finally take out the hose;
Using a towel dipped in a small amount of liquor or gasoline to wipe the hose can easily remove dirt while maintaining compliance. Be careful not to damage the plastic film or other materials on the drinker to avoid aging and brittleness.