Multi-layer belt dryerIt is equipped with a split air component to ensure that the material is heated more evenly. While pursuing product quality consistency, we should pay more attention to the smoothness of material flow, because this is directly related to the overall production efficiency. Therefore, improving production efficiency is an important task that cannot be ignored.
About the blanking process: We must be wary of blockages in the inlet. Because the dry material contains a lot of moisture, it is easy to bond. Once the material is blocked by the inlet, the drying process will not be able to proceed, seriously affecting the production efficiency. For this reason, the operating engineer is not only responsible for the delivery of materials in his daily work, but also needs to make the necessary adjustments to the dryer according to the actual situation. In addition, the installation of a stirring device at the inlet can effectively prevent the material from sticking and ensure smooth unloading.
When unloading, we also need to strictly control the quantity of materials. This is mainly determined by the yield of the dry material. If the yield is insufficient, it will adversely affect the drying effect.
Humidity controlEqually important. Different dry materials have different humidity characteristics, some materials have higher humidity, while others have lower humidity. In the drying process, we need to carefully check the humidity of the material, and select the corresponding treatment standard according to the humidity characteristics of the material to ensure that the drying effect is the best.
In order to ensure the stable and efficient operation of the belt dryer, we must regularly inspect and maintain the equipment. This includes checking if the fasteners are loose, if there are any abnormal sounds, etc. As soon as a fault is found, it should be rectified immediately. At the same time, we also need to pay attention to the wear and tear of transmission mechanisms such as V-belts and chains to ensure that they are in good working condition.