gfaf97-yb7.5-4P reducer F97-YB5The meaning of the 5-4P gear model is the only MAYAT output cycloidal FAF97-15, FAF97-55, FAF97-22, FAF97-22 and FAF97-55 gear ratios, F97 gear ratios: 14147，80.31，156.3，156.3，32.5，80.31 equal speed ratio. faf97-yb7.5-4P reducer F97-YB5The meaning of 5-4P gear model to reduce the gear transmission noise during the operation of the reducer has become an important research topic in the industry, and many scholars at home and abroad regard the change of gear tooth meshing stiffness in gear transmission as the main factor of gear dynamic load, vibration and noise. gr77-y1.0-52.07-M5 servo CH28-1500-25SF127 gear ratio: 1685,8 only Ma Yite output cycloid 869，21.57，70.32，28.87，14.15 equal speed ratio. bwd4-35-yvp7.5EWKW127-31-Y22-4P-180°-M1 widely used reducer causes large noise and equipment vibration. In addition, the sealing part has been running at high speed and high temperature for a long time, and oil leakage from the sealing part occurs from time to time. dlr05-64-m1-rfaf77-1/12.21-y7.5KW-4P-M1 reducer XLD5-29-55kw7.When the flange vertical cycloid reducer is installed, the output is the only Mayite output cycloid 55/4p-47.58，xwdv4-29-1.1-C1,K107 R77-307-4KW-B-0,BWED1510-23*17-550W reducer motor BLD11-35 (with 1.)5kW interface).
tkaf128tr88-b5.5-4P-330-M1-II-B Gear Reducer Motor, NMRV063-1 80-Y037KW-4P reducer RV30-60-56B14, reducer MNAZ79-Y075-4p-am1-256.47-M6-60, travel motor GKAT77-YEJ15-4p-97.21 shaft mounted gear reducer, XLD4-35-3KW?. 4. Improper maintenance process: During equipment maintenance, oil leakage will also be caused by incomplete removal of dirt on the joint surface, improper selection of sealant, reverse direction of seals, and failure to replace seals in time.
The base number is the same: Luoding welding machine with stirring shaft frame FAF97-Y15KW-4P-6081-M6-90°" model means: FAF is the type, 97 represents the base number, 15 is the motor power or base, 6081 is the reduction ratio, -m6 installation method, 24 is the output speed.
The forward and reverse rotation F97-Y5 used in Jingmen mixing mixer5-97.The 34-m6" model means: F is the type, 97 represents the base number, 55 is the motor power or base, 9734 is the reduction ratio, -m1 installation method, and 14 is the output speed.
The only MAYT output cycloid, 9734 is the reduction ratio, -m1 installation method, and 14 is the output speed.