Through the study of relevant knowledge, we will know that the tap water pipes at home have not been replaced or even cleaned in the walls for a long time. At the same time, the water in the water pipe is still in a static state for more than 90% of the time, which is conducive to the precipitation of impurities in the water and the breeding of bacteria and microorganisms. Therefore, water pipes that have been used for more than three years will hide all kinds of dirt and bacteria, so they need to be cleaned in time to ensure the safety and health of the household water environment. So, if you have a cleaning instrument, how is this cleaning process done? Today, I will share the cleaning process of household water pipes with you.
Household Water Pipe Cleaning Steps:
1. The first step is to prepare a container with enough tap water, with a water temperature of about 60 degrees, dilute the food-grade citric acid in a certain proportion and let it dissolve fully.
2. The second step is to close the main water inlet valve at home (generally installed under the kitchen sink) and the water inlet valve of the water heater. Connect the washing machine and air compressor, close the main water inlet valve at the same time, turn off the toilet, water purifier, water heater, solar energy, washing machine and other related external devices, and drain the remaining water in the pipeline at the same time (collect it to determine the amount of citric acid that needs to be diluted in the first step). Remove a short pipe of angle valve, connect the upper tube clean GB-07DX series high-frequency, secondary pressurized water pipe cleaner, and put the suction tube into a container dissolved with citric acid.
3. The third step is to remove the angle valve closest to the main water valve, connect the pulse output joint of the cleaning machine, put the suction head of the cleaning equipment into the citric acid water, open the faucet at the end of the home, and first use the leak detection function of the instrument to detect whether the pipeline is tightly connected and whether the old water pipe is leaking. After testing that there is no problem with the pipeline, use the liquid extraction function to inject the citric acid agent into the tap water pipeline, and let the citric acid solution soak in the tap water pipe for about 30 minutes.
4. In the last step, after the citric acid solution is soaked in the pipeline for half an hour, open the main water valve (in most cases, the water absorption function of the machine is used), turn on the air pump and the pumping pulse function of the cleaning instrument to flush the inner wall of the pipeline, and open each faucet one by one to clean until each group is not dirty.
5. Restore the pipeline, store the machine, and decontaminate and clean the faucet and handwashing station at the user's home, and deliver it to the customer for acceptance. Water pipe cleaning is still an emerging industry in China, so the level of health awareness in this area needs to be improved, which also gives us the opportunity to work hard for this, after efforts more and more people are willing to accept water pipe cleaning services, the industry is also more and more important, so such an industry is worth our efforts to pay a hundred points for this.