As the seasons change, the refrigerator at home also needs to adjust its working gear in time to adapt to the change in outside temperature. Especially in winter, how to reasonably set the stall of the refrigerator, which can not only ensure the freshness of food, but also achieve energy-saving effect, has become a concern for many families.The principle of temperature control in the refrigerator is to control the temperature inside the refrigerator by adjusting the working time of the compressor and the circulating flow of the refrigerant. Different gears correspond to different compressor operating hours and refrigerant flows, which in turn affect the temperature in the refrigerator.
The gear setting of the refrigerator is mainly carried out according to the outside temperature and the storage needs inside the refrigerator. For most refrigerators, the gear setting is usually between 0-7. In winter, the cooling effect inside the refrigerator will be relatively enhanced due to the low ambient temperature outside. Therefore, we usually need to choose a lower setting to avoid the internal temperature of the refrigerator being too low, causing the food to freeze or be damaged.
Generally speaking, when the room temperature is around 10 degrees, the refrigerator can be adjusted to 3-4 gear; If the room temperature is below 10 degrees, it is recommended to adjust the refrigerator to Variable 4-5. This setting can not only ensure the cooling effect inside the refrigerator, but also avoid the problems caused by too low temperature, reduce energy consumption, and prolong the service life of the refrigerator.
When adjusting the refrigerator gear, you also need to consider the environment in which the refrigerator is located. If the refrigerator is placed in a poorly ventilated or cooler place, it may need to be lowered appropriately; On the contrary, if the refrigerator is placed in a place with a high temperature or good ventilation, the gear can be raised appropriately.
1.Avoid direct contact with cold air: In winter, try to avoid direct contact with cold air from the outside world, and place it far away from the window or door to avoid direct condensation or cold air.
2.Check the sealing strip regularly: Regularly check whether the sealing strip of the refrigerator is in good condition, and replace it in time if it is damaged to ensure that the cold air inside the refrigerator does not leak out.
3.Reasonable placement of food: Inside the refrigerator, food should be placed reasonably to avoid accumulation of too much or too little to maintain the temperature stability inside the refrigerator.
4.Regular cleaning: Clean the inside of your refrigerator regularly from frost and water droplets to prevent bacteria from growing and maintain the hygiene of your refrigerator.
5.Avoid frequent opening and closing: Try to avoid opening and closing the refrigerator door frequently to reduce the loss of cold air and the increase in energy consumption.
6.Adjust the temperature setting: Keep the refrigerator room temperature between 0-4 degrees Celsius to avoid freezing food.
7.Watch out for condensation: Clean water droplets from the refrigerator regularly to prevent bacteria from growing.
8.Keep the heat dissipation smooth: Clean the fan and radiator at the back of the refrigerator regularly to ensure that the refrigerator dissipates heat properly.
9.Pay attention to food preservation: Store perishable foods at the right temperature and humidity to extend the shelf life.
10.Handling when not in use for a long time: If the refrigerator is not used for a long time, the refrigerator can be turned off and completely emptied of the food and moisture inside.
11.Troubleshooting: If the refrigerator is faulty or abnormal, you should contact professional maintenance personnel for repair in time.
In addition to setting the stall of the refrigerator reasonably, we can also adopt some energy-saving and environmentally friendly habits, such as:
1.Sort food storage: Sorting food into categories and expiration dates allows for better use of space in your refrigerator while also helping to maintain the freshness of your food.
2.Avoid placing overheated food: Try to avoid putting overheated food directly into the refrigerator, which can reduce the load and energy consumption of the refrigerator.
3.Keep the refrigerator ventilated: Ensuring that there is enough space around the refrigerator to ventilate can improve the heat dissipation of the refrigerator and reduce energy consumption.
The adjustment of the refrigerator in winter needs to be comprehensively considered according to the room temperature, the environment in which the refrigerator is located, and the storage of food inside the refrigerator. Reasonable gear setting can not only ensure the normal operation of the refrigerator and the preservation effect of food, but also effectively save energy and extend the service life of the refrigerator. At the same time, there are some details that need to be paid attention to when using the refrigerator in winter to ensure the safety and hygiene of the refrigerator.
February** Dynamic Incentive Program