Title:
1. Introduction to biogas flare.
A biogas flare is a kind of equipment used to treat combustible gases such as biogas, and is usually used in gas collection, storage, transportation, etc. The structure of the biogas flare consists of a storage tank, a combustion chamber, a discharge port and a series of control systems. Its main function is to burn biogas safely and effectively to prevent safety hazards caused by its leakage.
2. Acceptance criteria.
1.Equipment integrity: All parts of the torch should be intact and there should be no leakage at the connection.
2.Capacity testing: The storage tank capacity of the torch should meet the design requirements and be qualified after testing.
3.Pressure detection: The pressure of the torch should be stable and within a safe range under normal working conditions.
4.Control system: The control system of the torch should be sensitive and reliable, and be able to correctly display various parameters and perform relevant operations.
5.Safety facilities: The torch should be equipped with necessary safety facilities such as fire protection and safety valves.
3. Installation steps.
1.Foundation construction: According to the size and weight of the torch, the foundation is reasonably designed and constructed to ensure stability and safety.
2.Tank installation: Install the tank according to the prescribed procedures to ensure tightness.
3.Combustion chamber installation: Install all components of the combustion chamber to ensure that they are smoothly connected to the storage tank.
4.Control system installation: Install the control system of the torch according to the requirements and debug it.
5.Exhaust pipe installation: In accordance with the fire protection requirements, install the exhaust pipe of the torch to ensure a safe distance from the torch.
6.Installation of safety facilities: According to relevant regulations, install and debug safety facilities such as fire-fighting facilities and safety valves.
7.Commissioning and operation: After the whole installation is completed, a trial run is carried out to check whether each part is working normally and whether there is any leakage.
4. Precautions.
1.During the installation process, the relevant safety regulations and operating procedures must be strictly observed.
2.Once the installation is complete, a comprehensive safety check is carried out to ensure that the flare can operate safely and reliably.
3.During the trial operation, it is necessary to pay close attention to the working status of the torch and deal with the problems in time.
In short, the acceptance and installation of biogas flares are very important links, and it is necessary to strictly comply with relevant standards and specifications to ensure the safety and reliability of flares. At the same time, we should also strengthen safety awareness, prevent and deal with potential safety hazards, and ensure public safety.