For many friends,Kitchen appliances are cleanedProbably the trickiest and most time-consuming of them all. toRange hoodFor example, if you don't develop good cleaning habits, the long-term accumulation of oil stains will not only increase the difficulty of cleaning work, but also when everyone gathers to make an appointment for door-to-door cleaning but finds that you need to queue up, you will probably be able to experience what it means to be "lazy for a while, tearful at the end of the year."
For this reason, a detailed list has been reorganizedRange hood cleaning guide, whether you are a year-end cleaning or a daily cleaning can come in handy (the dry goods ahead, it is highly recommended to collect them.)
Before cleaning the range hood, there are two points that you need to pay attention to——
Selection of cleaning tools: Do not use rough tools such as steel wool balls and hard brushes, it is recommended to use soft cloth and soft brushes; Choice of detergent: Do not use strong acid, strong alkali, strong corrosive detergents, it is recommended to use neutral cleaning agents (such as dish soap) to prepare cleaning tools and detergents, and then you can start!
1. Clean the surface of the range hoodIt doesn't matter what model your range hood isMachine tablefacesThey are the most basic and the most convenient parts to clean. Develop a good habit of cleaning the surface of your range hood after every cooking, and you only need to master two easy steps:
Step 1: Use a neutral soap or neutral detergent and leave it on for a short time.
Step 2: Wipe off stains with a soft cloth and dry the surface.
Some friends may leave fingerprints or water marks in the process of wiping the glass panel, so it is recommended to use itDryFish scale ragsRemove, or useLazy rags with alcoholPerform wiping; If it is a handprint or watermark of the stainless steel panel, it can be usedStainless steel cleaner(e.g. Bi Li-Franc, etc.) orWhite oilWipe to remove.
Reminder: Be sure to unplug the power plug when cleaning the range hood, and avoid the power switch when wiping the surface of the machine to prevent water from entering the computer board.
2. Clean the oil cup
How it works:: Drag both ends of the oil cup with both hands, keep the oil cup horizontal, slowly move out horizontally in front of the range hood, remove the oil cup, and pour out the accumulated oil; Then place the oil cup in a water container and wipe it clean with a mild detergent and a soft cloth. Tips
When the oil storage in the oil cup reaches two-thirds of the volume of the oil cup, it needs to be cleaned in time;
It is recommended to put the oil cup into the smoke machine before putting a mixture of water and detergent in it, and then it will be easier to clean
3. Clean the butterfly wing
How it works:: Grasp the front edge of the butterfly wing with both hands, flip it down forcefully to make the butterfly wing buckle detached, and then flip down at a certain angle to remove the butterfly wing plate (lifting smoke machine such as EM7T.).s、em10t.S and so on, you need to press the dismantling mode button first, and the butterfly wing plate will be lowered to the lowest position); Then, soak the butterfly wing in warm water with a neutral detergent and wash it off with a soft brush. Fourth, the oil mesh grid is cleanTop suction range hood (take EM series as an example).
How it works:: Hold the oil net with your left hand, open the two screws that fix the oil mesh with a Phillips screwdriver with your right hand, and remove the oil mesh (lifting hoods such as EM7T.)s、em10t.S and so on, you need to dial the external network card first and remove the external network); Then, soak the mesh in warm water with a neutral detergent and wash it off with a soft brush.
Side-draft range hood (take JQ series as an example).
How it works:: After opening the smoke screen, unplug the power plug, pull the left and right sides of the grille with both hands, pull outward to open the grille, rotate the grille down at a certain angle, and pull it outward to remove it; Then, also wash the grille with a soft rag soaked in a neutral detergent and wipe the outer surface of the air inlet ring.
After the oil cup, butterfly wing plate and oil net are cleaned and dried with a soft cloth, they can be assembled according to the original route. In this way, the daily basic maintenance work of our range hood is completed5. Clean the inside of the range hood
The above-mentioned oil cups, oil nets, butterfly wings, etc. are all parts that can be disassembled and washed by ourselves when we clean the range hood daily, but like the impeller and volute components inside the hood, if the cleaning method is improper, it is easy to cause damage to the machine, so it is generally recommended that you ask professionals to clean it at home. 