Installing the plastic carriage skateboard needs to be done by following these steps:
1.Prepare tools and materials: First, you will need to prepare some tools and materials, such as screwdrivers, wrenches, hammers, drills, rulers, pencils, etc.
2.Clean the inside of the car: Before installing the skateboard, you need to clean the inside of the car to make sure there is no dust, debris, or other obstructions.
3.Measure the length of the carriage: Use a ruler to measure the length of the carriage and determine the length of the skateboard. You can customize the size of the skateboard according to your needs.
4.Install the skateboard bracket: Use an electric drill to punch holes in the appropriate places on the inside of the carriage and then install the skateboard bracket. Make sure the bracket is securely fastened and does not move or tilt.
5.Installing the Skateboard: Place the skateboard on the stand and adjust its position to fit the shape and size of the carriage. Make sure the skateboard is flat and fits snugly inside the cabin.
6.Adjust the height of the skateboard: Use nuts and spacers to adjust the height of the skateboard so that it is at an appropriate distance from the bottom of the cabin. Make sure the skateboard height is consistent to avoid imbalance.
7.Check the installation effect: Check whether the slide plate is firmly installed and can slide smoothly. If any problems are found, they need to be adjusted or fixed in time.
The above is the basic process of installing plastic carriage skateboards, I hope it will help you!