Microplate reader maintenance: Failure to start fault troubleshooting and detailed explanation of repair methods
1. Reasons and solutions for the failure of the microplate reader.
1.The power socket is not plugged in tightly or the socket is short-circuited.
Solution: Check whether the power socket is plugged in tightly and check whether the power cord is damaged; Try replacing the power cord with a new one and check for a short circuit in the power outlet.
2.The internal connection line of the machine is loose or short-circuited.
Solution: Check whether all the connecting wires inside the instrument are plugged in tightly and whether they are short-circuited; Clean up the dust inside and keep it clean.
3.The optical path is in the wrong position.
Solution: Place the optical path in the appropriate position and confirm that the parts are connected correctly before use.
4.Faulty light source.
Solution: Replace the light source with a new one.
5.Program malfunction.
Workaround: Reinstall or update the microplate reader program.
2. Routine maintenance methods of microplate readers.
1.Keep the instrument clean.
After each use, internal and external cleaning is required. Avoid using excessively wet paper towels or towels when cleaning to avoid causing short circuits or rust in the circuit.
2.Replace consumables regularly.
For example, regular replacement of sample holders, filter membranes, standards, etc., can improve the service life and accuracy of the instrument.