A hair clipper is a tool for trimming and decorating hair. When using a hair clipper, pay attention to the maintenance of the blade, such as removing the blade, cleaning the debris, washing and drying, dripping lubricating oil, etc.
Hair clipper CE certification directive:
Hair clippers need to be charged to operate, so they are operated in accordance with the EU Low Voltage Directives LVD-2014 35 EU and EMC-2014 30 EU
Hair clipper CE certification core requirements:
1. General requirements;
In order to ensure the safety of the hair clipper equipment for its intended use, the hair clipper should be marked with its use characteristics, identification and compliance matters, and if it is difficult, it can be explained in the manual.
Clearly mark the name of the manufacturer, trade name or trademark on the hair clipper and print it on the packaging if it is difficult.
Hair clippers and their parts should be manufactured in such a way as to ensure that they are safely and properly linked and assembled.
Hair clippers must be designed and manufactured to meet these requirements if they are used and maintained for the purpose for which they are intended.
2. Prevent the danger caused by the hair clipper equipment;
The risk of physical or other injury to persons and domestic animals caused by direct or indirect contact with electricity shall be avoided.
It does not produce temperatures that could be dangerous.
Adequate protection of persons, poultry and property from non-electrical hazards caused by electrical equipment and empirically identified.
The insulation must be suitable for every possible foreseeable situation.
3. Prevent external factors from affecting the hair clipper and causing danger;
Hair clippers should meet the expected requirements to protect people and property from danger.
Under predetermined environmental conditions, hair clippers are resistant to non-mechanical influences, protecting people, livestock and property from danger.
Hair clippers do not endanger people, livestock and property in the event of foreseeable overload.
Test standards: EN55032 and EN60335
Hair clippersTesting and certification process:
1. Project application - submit the testing application to the testing institution.
2. Data preparation - according to the testing requirements, the enterprise prepares relevant documents.
3. Product testing - the company will send the samples to be tested to the laboratory for testing.
4. Preparation of reports - certification engineers prepare reports according to qualified test data.
5. Submit for review - the engineer will review the complete report.
6. Issue a certificate - after the audit is correct, the certificate will be issued.