How to use the vertical jet mill is shared.
1. Overview. Vertical jet mill is an efficient and environmentally friendly ultra-fine grinding equipment, which is widely used in chemical, pharmaceutical, food, ceramic and other industries. The equipment crushes the material to the micron level through high-speed airflow impact and friction, which has the advantages of uniform crushing, fine particle size, high output and no pollution. This article will introduce the use of vertical jet mill in detail to help users better play its performance.
2. Installation and commissioning.
Install the vertical jet mill on a stable ground to ensure that there is enough space between the equipment and the surrounding environment for easy operation and maintenance.
Connect the power supply, check whether the motor is steering correctly, and if you find that it is reversed, please adjust the power wiring.
Debug the feeding device and discharging device of the pulverizer to ensure uniform feeding and smooth discharging.
Adjust the airflow pressure of the pulverizer and the temperature in the pulverizing chamber as needed to obtain the best crushing effect.
3. Steps.
Turn on the power switch to start the grinder.
The material to be crushed is added to the feeding device to ensure that the material enters the crushing chamber evenly.
Adjust the airflow pressure and temperature through the control panel to adapt to the crushing requirements of different materials.
Observe the operation of the crusher, if abnormal sound or vibration is found, it should be stopped immediately for inspection.
When the material is crushed to the required particle size, the power switch is turned off and the machine is stopped for reclaiming.
4. Precautions.
Regularly inspect the fasteners and seals of the shredder to ensure that the equipment is operating properly.
Clean the crushing chamber and feeding device regularly to prevent clogging and wear.
Pay attention to observe the particle size of the crushed material, if it does not meet the requirements, you need to adjust the air pressure and temperature.
Avoid overload operation and long hours of continuous work to avoid damage to the equipment.
During the operation, it is strictly forbidden to put your hand into the crushing chamber to avoid accidents.