Precision vision laser pinhole inspection equipment is a device that uses picosecond photonic technology to detect microvias, and the equipment is equipped with a detection sensor with picosecond speed and an infrared laser source. The high-speed response capability of this device enables the device to detect 5um and 10um micro-holes at high speeds. This type of equipment must be designed, produced and used in accordance with the European standard EN 60825 -1. The ASM20D is designed, manufactured, and tested to this standard. The ASM20D Pinhole Detector is an optoelectronic static system designed to detect micropores on non-transparent rolled aluminum foils.
Advantages of using lasers:
1. It has a high resolution;
2. Strong anti-interference ability;
3. The amount of information obtained is abundant;
4. It can work around the clock;
5. No contact with the sample, no damage;
6. No need for customers to provide samples, you can judge according to the database;
7. Rapid analysis to identify the characteristics of various thicknesses;
8. Measurement under high and low temperature and high pressure conditions;
9. Spectral imaging is fast and simple, with high resolution, stable instrument, moderate size, low maintenance cost and simple use.
Core technology] 1. Core hardware: high-precision laser and radar sensors;
2. Detection method: ** detection;
3. Installation advantages: detect two sides of the vertical slitting machine at the same time;
4. Installation location: It can be installed in slitting machine, horizontal slitting machine, vertical slitting machine, winding machine and rolling mill;
5. Mechanical size: can be customized according to customer model;
6. Equipment maintenance: it can be automatically removed or manually removed to facilitate regular maintenance of the equipment;
7. Data calibration: microbore calibration according to European standards.
System features] % rolled aluminum foil full inspection.
2. Provide timely and reliable information for operators.
3. Real-time alarm of periodic defects.
4. Real-time monitoring of production defect dynamics.
5. Generate a detailed quality report covering each product volume.
6. Statistical analysis of the hole size and its proportion in the whole production.
7. Provide a historical database for long-term production evaluation.
Core Unit].
Detection Interface].