Galvanized steel pipe sleeve is a method of processing the end of galvanized steel pipe through a certain process to enable it to be connected with other pipes or pipe fittings. This method is widely used in construction, plumbing, fire protection and other fields, and has the advantages of firm connection, safety and reliability, and easy operation. This article will introduce in detail the process flow, operation points, precautions and other aspects of galvanized steel pipe threading.
4.Threading.
Insert the smoothed nozzle into the threading machine, adjust the size of the threading machine according to the required specifications, and start the machine for threading processing. Care should be taken to keep the nozzle fixed to the threading machine to avoid deviation or loosening.
5.Install the fittings.
After the threading is completed, the pipe fittings (such as pipe clamps, nuts, etc.) are installed on the nozzle and tightened using pressure tongs. Pay attention to ensure that the pipe fittings are installed firmly to avoid loosening or falling off.
6.Inspection and commissioning.
After the installation is completed, the connection parts are inspected and debugged to ensure that there is no leakage, no loosening, and meets the requirements of use.
Third, the key points of operation.
1.When threading processing, it is necessary to choose the appropriate specification of the threading machine to avoid too large threads or too small threads, which will affect the connection effect.
2.When installing pipe fittings, it is necessary to ensure that the quality and specifications of pipe fittings meet the requirements and avoid inferior or fake products.
3.When tightening pipe fittings, it is necessary to use appropriate tools and methods to avoid too tight or too loose situations, which will affect the firmness and safety of the connection.
4.When carrying out galvanized steel pipe threading, it is necessary to pay attention to the safety of operation to avoid accidental injury.
5.After the completion of the threading processing, the site should be cleaned up in time to keep the working area clean and hygienic.
4. Precautions.
1.When carrying out galvanized steel pipe threading, it is necessary to ensure that the quality and specifications of the pipe meet the requirements to avoid poor connection or safety accidents.
2.During operation, it is necessary to pay attention to safety protection measures and wear gloves, masks and other protective equipment to avoid accidental injury.
3.When using tools such as threading machines, it is necessary to follow the operating procedures and precautions to avoid mechanical failures or safety accidents.
4.When installing pipe fittings, it is necessary to ensure that the quality and specifications of pipe fittings meet the requirements to avoid poor connection or safety accidents.