When plugging leaks in the bathroom, it is very important to choose the right materials, and here are some commonly used materials for plugging leaks in the bathroom:
1.Modified Acrylic Grouting Compound: This material has good adhesion and can be combined with various substrates or materials to form a mixed gel. It has good perfusion and diffusibility, good elasticity after curing, not easy to break, and basically no retraction in a saturated state, and can be restored to its original state when exposed to water after water loss.
2.*Special waterproof material for smashing bricks**: This material can be waterproof and plugging without damaging the tiles. During construction, it penetrates into the mortar layer through the gap of the tile, and after the mortar layer reacts dry, the capillary pores and leakage holes are blocked, and the mortar layer is integrated.
3.*Hard mortar**: The hard mortar will solidify into a cement hard block after construction, and the waterproof effect on the back side is good. However, it should be noted that the hardness of rigid mortar after curing is higher and may crack with the deformation of the base layer.
4.One-component polyurethane: This material has good water-repellent properties and is suitable for a wide range of substrates, but may require specialized construction techniques.
5.*Plugging King**: Plugging King is a fast-curing plugging material, which is suitable for quickly repairing leakage points. It usually has good adhesion and elasticity and is able to adapt to a certain degree of substrate deformation.
6.*Waterproof cement**: For floor drain installation, the use of waterproof cement can better integrate with the base and provide a stable waterproof effect.
When choosing a plugging material, you should consider the specific leakage of the restroom, the construction conditions, and the budget. For complex water leakage problems, it is recommended to ask a professional waterproofing company to evaluate and construct to ensure the plugging effect. At the same time, the correct use of materials and the quality of construction should be ensured during the construction process to achieve the best waterproof effect.