Can t turn up the water temperature of a gas water heater? Maybe you didn t do that

Mondo Home Updated on 2024-02-01

What is your favorite thing to do during this cold time? Some people like to play hot pot, and some people take the time to go to Harbin for a small tour, and their favorite is to take a hot bath. In the winter, taking a hot bath is really comfortable. But recently, I always hear some friends around me complaining that the gas water heater at home doesn't know what kind of wind to pump, and the water temperature can't be adjusted, so I can only wash it with semi-warm water, shivering, and I have a cold and headache.

The kitchen water is very hot, but the water temperature in the bathroom is not high enough, the machine is working, but the water temperature is not high enough, and there is no problem with the water heater running, but why is the water temperature in the bath always not high enough? Today, I'm going to give you a good analysis, and the treasures in need can be collected and get

01.The gas pressure is insufficient.

In the case of insufficient firepower, the water temperature of the gas water heater is not high after ignition. Let's imagine it, but let's think about it: boiling water on a high fire and boiling water on a low fire for 5 minutes, the water temperature at the high fire end will be much higher than that at the low fire end. Common gases on the market are divided into: liquefied gas and natural gas, so please make a judgment according to the gas you use

Insufficient LNG gas gas pressure can be due to the following:

1. When the liquefied gas (gas cylinder) is about to be consumed;

2. The gas pipeline is blocked, and the gas rubber pipe is "tortuous".

Solution: 1. Replace the gas cylinder with sufficient gas;

2. Check whether the indoor gas pipeline is normal, and replace it as soon as possible if the gas pipeline is blocked (the gas hose is recommended to be replaced once every one and a half to two years);

Reasons for insufficient gas gas pressure:

1. The peak gas consumption, such as dinner time, may cause the amount of gas to be insufficient and the pressure to drop;

2. The air source switch is not fully opened;

3. The gas pipeline is blocked and the gas rubber pipe is "tortuous";

Solution: 1. During the peak gas consumption, the inlet valve under the small water heater can be properly closed;

2. Check whether the indoor gas pipeline is normal, and replace it as soon as possible if the gas pipeline is blocked (the gas hose is recommended to be replaced once every one and a half to two years);

3. Contact the local gas company to request on-site testing;

02.The water temperature varies depending on the location.

The gas water heater is installed in the kitchen, the kitchen water temperature is high, and the bathroom water temperature is low, what is the reason?

It may be caused by the following:

1. The gas water heater is installed in the kitchen, the pipeline is short, and the heat absorbed by the wall and water pipe is relatively small.

2. Water channeling inside the hot and cold water hole inside the mixing valve.

3.You can consider buying a gas water heater with a pressurization function. For example, Sentai Constant Temperature Waterfall Zero Cold Water Gas Water Heater C15 is equipped with automatic cruise pressurization, even if it is a large flat, duplex and other large apartments, or the whole house uses water at multiple points at the same time, it can also turn on the shower, surging hot water is coming, say goodbye to the trouble of low water pressure and less water, and the refreshing water flow relieves a tired body, giving you a waterfall-like hearty bathing experience.

Solution: 1. If you are using a gas water heater with a yield of less than 13 liters, it is recommended to replace the product with a higher yield;

2. The hot water pipe is equipped with thermal insulation cotton;

3. Replace the mixing valve.

03.Too much water.

The electricity and gas are normal, and the machine can work, but the water temperature can't go up? You can follow the instructions below.

1.Turn the lever of the water heater inlet to the left.

2.If there is no water regulator on the water heater, the cold water valve under the small water heater can be closed appropriately.

If the above reasons are ruled out, the water temperature of our gas water heater still cannot be raised, it is recommended that we ask a professional after-sales door-to-door inspection.

Related Pages