The safety officer qualification certificate is valid for three years, not for life, the holder must participate in the continuing education and training assessment organized by the Provincial Department of Housing and Urban-Rural Development, and the qualified person will be issued a new certificate, while the original certificate will be invalid, and then participate in continuing education after three years, and so on. The registration process for continuing education of safety officers is: register on the local construction safety supervision platform or comprehensive government affairs network, and fill in the information: including name, ID number, academic background, certificate number, etc.; After the audit is passed, you can learn and wait.
Safety officers are professionals engaged in construction safety planning, inspection, and supervision at construction and municipal engineering construction sites. As one of the nine certificates of construction, the certificate type belongs to the post certificate, which is mainly equipped when engaged in the position of construction safety officer, which shows that the gold content of the certificate is very high.
After getting the certificate, having a safety officer certificate when applying for a job can prove that you have the ability to work in this field, and after entering the job, the salary of those who have a certificate will be higher than that of those who do not have a certificate, and it can also be used as a material for evaluating the title.
To put it simply, the safety officer certificate is a certificate of employment, and after holding the safety officer qualification certificate, it means that you have the ability to work required by the job, and because the safety officer certificate is an appraisal certificate of vocational and technical skills, the relevant job responsibilities are more complicated.
The safety officer certificate has been valid, but it needs to be reinforced, and the certificate holder must be verified and renewed before the expiration of the validity period, during which he should participate in a certain period of training and learning, that is, continuing education.
2024 Safety Officer Exam Questions and Answers (For more real and simulated questions, please refer to [Safety Officer Exam Manual] Come on***.)
Question 1: The 220 380V three-phase four-wire low-voltage power system with direct grounding of the neutral point of the power supply for temporary power projects at the construction site must comply with the provisions of ( ).
a.Adopt the best power distribution system
b.The TN-S zero connection protection system is adopted
c.Adopt a secondary power distribution system.
d.Adopt ** leakage protection system
e.Adopt two-stage leakage protection system
Correct answers: a, b, e
Question 2: Occupational safety and health facilities must meet the standards set by the state. The labor safety and health facilities of the new, reconstructed and expanded projects must be the same as the main project ( ).
a.Design at the same time
b.Construction at the same time
c.Acceptance at the same time.
d.At the same time, it was put into production and use
e.At the same time, the project was completed
Correct answers: a, b, d
Question 3: The cost of safety protection and civilized construction measures is composed of ( ) included in the measure fee in the "Cost Composition of Construction and Installation Projects".
a.Civilized construction costs
b.Environmental protection fee
c.Safety construction costs.
d.Temporary facility fee
e.Security labor costs
Correct answers: a, b, c, d
Question 4: The structure of the bottom of the scaffold should meet the requirements of ( ).
a.The bottom end of each pole should be provided with a base or backing plate, and a longitudinal and transverse sweeping rod should be provided.
b.The longitudinal sweeping rod is not more than 200mm away from the base epithelium, and is fixed with right-angle fasteners and vertical rods.
c.The longitudinal sweeping rod is not more than 1000mm away from the base epithelium, and is fixed with right-angle fasteners and vertical rods.
d.The transverse sweeping rod should be fixed on the vertical rod immediately below the longitudinal sweeping rod with right-angle fasteners.
e.The transverse sweeping rod is located at 0 from the bottom surface8m
Correct answers: a, b, d
Question 5: The basic policy of safety production management in China is ( ).
a.Safety first
b.Prevention is the priority
c.Mass prevention and treatment.
d.Regulation
e.Comprehensive governance
Correct answers: a, b, e