The conventional high-power charger charging method is divided into two ways to combine the charging mode of constant current charging and constant voltage, first of all, constant current charging, the voltage form of the battery rises gradually until it is close to the set voltage, and then turns to the charging mode of constant voltage, until it is full, charging in a constant current way, the charging process, the current will always be unchanged, and several methods are introduced below
The first point: maintain the normal charging method of the charger: charge at the standard speed power, the charging voltage must not exceed the specified limit, and the charging time is also limited.
The second point: trickle charging method, because this is a very small current, the capacity value is also very small, is a low charging voltage, it is necessary to maintain the state of the charging point or just offset the battery to automatically discharge, for the longer discharge battery, to have an effective recovery performance.
The third point: to charge in a fast way, with a large current, and the battery within the rated time, the battery is fully charged.
Constant voltage high-power charger charging method: the voltage does not change in the process of charging, the current of the voltage will be very large at the beginning, but gradually extended and increased, it will gradually become smaller, and finally there is no more, completed.