For the daily maintenance of centrifugal pumps, the following points also need to be noted:
First of all, it is necessary to ensure the cleanliness and ventilation of the pump room to prevent dust and debris from entering the inside of the pump body and affecting the normal operation of the pump. At the same time, it is necessary to keep the pump body and accessories dry to prevent short circuit or damage to the electrical equipment caused by moisture.
Secondly, it is necessary to regularly check the lubrication of the bearing of the centrifugal pump to ensure that the quality and quantity of the lubricating oil meet the requirements. When adding lubricating oil, be careful not to add too much or too little, so as not to affect the normal operation of the bearing.
In addition, for the sealing device of centrifugal pumps, it is necessary to regularly check its sealing performance to prevent leakage and wear. If the seal is found to be aged or seriously worn, it should be replaced in time to ensure the sealing effect.
Finally, during the operation of the centrifugal pump, it is necessary to pay close attention to the operation status and parameter changes of the pump, and stop the machine for inspection in time if abnormal conditions are found. At the same time, it is necessary to do a good job in operation records and fault analysis to provide a basis for subsequent maintenance and equipment optimization.
To sum up, the operation and maintenance of centrifugal pumps need to be carried out comprehensively and meticulously, including daily inspection, maintenance and troubleshooting. Only by strengthening the daily maintenance and maintenance work can we ensure the long-term stable operation and efficient operation of the centrifugal pump, and provide a strong guarantee for the production and development of the enterprise.