Construction method of stainless steel plate:
1) Installed on the pedestal is used for wood or hard steel keel keel parts during the manufacturing process, check the verticality and flatness repeatedly.
2) Nailed to the sealed bottom plate of the bottom plate. 5 to 12 mm plywood is the same as regular wooden cover. However, if there is a hard steel keel angle or there is a first, then drill into the electric drill to fix the bottom plate keel, the self-tapping screws and screw heads can not exceed the surface height of the base plate.
3) Before installation, the stainless steel plate must be factory designed according to the design size and shape. Stainless steel mouldings decorate the wall if the bottom plate and weld the stainless steel in advance if the bottom plate is welded by applying adhesive to the back of the stainless steel screws attached to the pre-prepared stainless steel or the bottom surface of the stainless steel plate if you do not like it. 4. In the stainless steel plate, or the interface between the edge of the corner and the edge of the corner is filled with sealing material, stainless steel pressing groove and other methods during the display process.
Scope of special equipment license certification.
A1 A2 B class elevator installation and repair license, pressure pipeline installation design license, A B class crane manufacturing including installation and repair transformation license, A2 D class pressure vessel manufacturing license, TS certification, A B class boiler manufacturing including installation and repair transformation license, valve manufacturing license, pressure pipeline components license, three-dimensional garage manufacturing qualification, passenger ropeway manufacturing qualification, amusement facilities manufacturing qualification, etc.