SIP Touch Screen Network Paging Microphone-SV-8006TP (Desktop Intercom Host).
SV-8006TP is a desktop intercom host from Shenzhen Ruikeda, with 10 100M Ethernet interface, equipped with microphone input and speaker output, and also equipped with 7-inch high-definition touch screen, which can be used with the server.
The SV-8006TP network paging microphone can perform one-to-one unicast, one-to-many multicast and all-area broadcast to the terminal through the microphone, and can also make two-way communication with the terminal that supports intercom in the system. SV-8006TP as the host of the network radio intercom system, can be used in the need for intercom help, emergency alarm and environmental monitoring of the place, SV-8006TP paging microphone can be through the microphone or local line input to the terminal partition broadcast, at the same time support to read the SD card or U disk in the audio file to the remote terminal broadcast**, can also be with the system support intercom terminal for two-way SIP call. This SIP paging microphone is equipped with a 7-inch touch screen, which can be used for system settings, and can also enter the IP of the terminal into the address book, and the operation terminal can be selected through the address book. SV-8006TP is used as the host of SIP broadcast intercom system, which can be used in places that require intercom for help and emergency alarm, such as self-service banks, interrogation rooms, classrooms, hospitals, including parking lots and other control centers.
SV-8006TP is used as an intercom terminal, which supports full-duplex two-way intercom, and has a good echo suppression function to ensure the safety of the system.
SV-8006TP Touch Screen SIP Network Paging Microphone.
SV-8006TP Touch Screen SIP Network Paging Microphone Advantages.
Professional paging microphone combined appearance, using 7-inch high-definition touch screen, easy and fast operation;
It uses a high-speed industrial-grade chip with a start-up time of 1 second.
Gooseneck microphone, high performance and low noise;
5W 4ohm full-range speaker for two-way talk and monitoring.
Support the display of broadcast intercom history for easy identification.
Hardware echo cancellation and unique software echo suppression;
It has a USB port and an SD card slot for external audio input.
It has an audio line output port, which can be connected to an external active speaker for sound amplification.
It has an audio line input port, a remote audio output for amplification, and a two-way mixing output for recording;
You can choose to connect to a server or use it off-server.
SV-8006TP touch screen SIP network paging microphone parameters.
Input voltage: DC12V
Power consumption: static < 300MW
Human-computer interaction: 7-inch 1024*600 capacitive touch screen.
Microphone frequency domain: 70 125kHz, signal-to-noise ratio 68dB
Audio Output: 5W 4 ohm full-range speakers.
Line Input: Typical Amplitude 15VPP, internal resistance 10K
Line Output: 1500mVpp typical, THD < 03%, internal resistance 500, signal-to-noise ratio 83db
Audio**: Support up to 48K sampling, 192Kbps bit stream, MPEG, ADPCM decoding.
Audio playback: Support ADPCM decoding, 8K-32K sampling optional.
Network interface: 10 100BASE-TX adaptive network, RJ45 interface, data transmission and reception indication.
Network Protocols: Support IP, ARP, ICMP, DHCP, UDP, DNS, IGMP, etc.
Operating temperature: 0-65
Size: 250mm 145mm 55mm
Weight: 2kg (including microphone rod).
Installation: Desktop.
Product Features and Functions:
l Intercom function: You can enter the SIP number by pressing the button to call the designated SIP terminal, or you can choose to call the SIP terminal through the pre-** address book. The intercom adopts a full-duplex mode with echo cancellation function.
l SIP multicast: The local audio can be sent to all other terminals to realize the function of sub-regional broadcasting. Broadcast shouts support 10 priorities, and high priority audio can interrupt low priorities.
l Address book function: The SIP terminal number and SIP multicast address can be sent to the host, so that the SIP microphone host can initiate SIP intercom or multicast after simple operation.
l Pre-plan function: The audio source file and the program can be pre-delivered to the microphone host to realize the audio program broadcast on the microphone.
l **Function: Support reading audio files from SD card or USB flash drive, and send broadcasts to remote destinations**.
SV-8006TP touch screen SIP network paging microphone: SIP partition broadcast shouting, SIP intercom, plan broadcasting, SD card**, U disk**.