OneParker valvesA common cause of immobility
1.Parker Valve Blockage: Parker valves may be blocked due to impurities, particles, etc. in the medium during use, resulting in Parker valves not being able to open and close properly.
2.Parker Valve Jamming: Parker valves may become stuck and inoperable due to prolonged maintenance or the presence of fouling components in the medium.
3.Transmission mechanism failure: Parker valves' transmission mechanism such as gears, worms, etc., wear and fracture, etc., will also cause Parker valves to fail to operate.
4.Power or Air Supply Issues: For electric or pneumatic Parker valves, a failure of the power supply or air supply may cause Parker valves to not function properly.
5.Control System Failure: If a Parker valve's control system fails, such as a damaged sensor, a short circuit in the wiring, etc., it can also cause the Parker valve to become immobile.
IIParker valvesImmovable repair methods
1.Cleaning Parker Valves: For Parker valves that are blocked and not moving, the Parker valve needs to be cleaned first. Parker valves can be cleaned of impurities and particulates from the inside of Parker valves with the right tools or cleaning chemicals.
2.Lubrication and loosening: For stuck Parker valves, try lubricating the Parker valve with lubricant and gently tapping the Parker valve to loosen it. At the same time, Parker valves are regularly maintained to prevent fouling and seizure.
3.Replace the transmission mechanism: If the transmission mechanism fails, it needs to be replaced in time. During the replacement process, new components that match the original transmission mechanism should be selected, and the correct installation and reliable fastening should be ensured.
4.Check the power supply and air supply: For electric or pneumatic Parker valves, check that the power supply and air supply are normal. If there is a fault, the relevant parts should be repaired or replaced in time.
5.Repair or Replace Control System: If Parker's valve control system fails, first check that the sensors, wiring, and other components are in order. If there is damage or short circuit, it should be repaired or replaced in time. At the same time, the control system is regularly maintained and maintained to ensure its stable operation.
3. PreventionParker valvesImmovable measures
1.Regular Maintenance: Perform regular maintenance on Parker valves, including cleaning, lubrication, tightening, etc., to prevent Parker valves from clogging and stuck.
2.Parker Valves of the Right Materials: According to the characteristics of the medium and the environment in which they are used, select the appropriate materials and seals to improve the durability and reliability of the Parker valves.
3.Regularly check the power supply and air supply: For electric or pneumatic Parker valves, the power supply and air supply should be checked regularly to ensure that they are stable and reliable.
4.Improve the skill level of operators: Strengthen the training and education of operators, improve their skill level and safety awareness, and reduce Parker valve immobility caused by misoperation.