Common faults in repairing Olympus gastroscopes include the following:
1.Display problems: The display screen cannot be displayed, the display is not clear, and the display screen is blurred. This could be due to a malfunction of the display itself, or a problem with the wiring and interface connected to the display.
2.Light source problem: The light source is not working properly or the brightness is insufficient. The light source is an important part of the gastroscope, and if it fails, the gastroscope will not be able to illuminate the examination area normally, affecting the diagnostic results.
3.Lens problems: The gastroscope lens has problems such as blurry, out-of-focus, and stains. This can be caused by damaged or dirty lenses, or loose lens components.
4.Bending mechanism problem: The gastroscope cannot be bent or the bending mechanism is stuck. This can be caused by abrasion, breakage, or foreign material blockage of the internal parts of the bending mechanism.
5.Control button problem: The control button of the gastroscope cannot be operated normally or is out of order. This could be due to a malfunction of the button itself, or a problem with the button's wiring and interface.
6.Battery problems: The gastroscope does not charge properly or the battery life is significantly reduced. This can be caused by an aging or damaged battery, or a problem with the charging line.
7.Curved joint problem: The curved joint of the gastroscope cannot be bent properly or the curved joint is stuck. This can be caused by structural problems with the bend joint, foreign body blockage, or a malfunction of the electronic control system of the bend joint.
The above are the common fault situations for the maintenance of Olympus gastroscope, and maintenance personnel need to diagnose and repair these faults to ensure the normal operation and use of the gastroscope.