Laser marking machine, from the name of the equipment, seems to be only used for marking, but in fact, it has a wide range of uses. It can be used for marking a variety of material items, dotting the light guide plate, marking easy-to-tear lines, cloth burning, thin material punching, thin material cutting, electroplating spraying parts to remove coatings, glass crystal inner carving, etc., and can also be used for mold biting and drying patterns.
1. The texture marking is long-lasting: the texture marked by the laser is not easy to imitate and change, and will not fade due to environmental relations (touch, acidic and alkaline gas, high temperature, low temperature, etc.);
2. Non-contact processing: laser marking is non-mechanical"Light knives"Processing, no corrosion on the surface of the workpiece, none"Knives"Abrasive, non-toxic, non-polluting;
3. High grain accuracy: the pattern of the items marked by the laser marking machine is beautiful and delicate, fine and clear, beautiful and good, and the minimum line width of the ultraviolet laser marking machine produced by Fulan Laser can reach 001mm, which can meet the needs of engraving a large amount of data on very small workpieces;
4. Low operating cost: the laser marking machine is marked and formed at one time, the marking speed is fast and the energy consumption is small, and no consumables are required, so the operating cost is low;
5. Simple operation: no experience is required, and it can be learned in about 2 hours (Foshan Fulan Laser will conduct one-on-one training for customers until they learn);
6. High processing efficiency: the laser marking machine is controlled by an industrial computer, the laser beam under the control of the computer can move at high speed, and the marking process can be completed within a few seconds;
7. The production cycle is extremely short, and the editing and development speed is fast: it is necessary to mark at the same time;
8. Any content can be marked and edited immediately: the combination of laser technology and computer technology, all the information to be marked is edited by the computer in real time, as long as it is programmed on the computer, the laser printout can be realized, and the content of the marking design manuscript can be changed at any time;
9. Able to control the depth of engraving at will;
10. Environmental protection: laser marking is non-contact marking, which saves energy, does not need to use strong acids, strong alkalis and other chemicals, and does not produce industrial wastes such as mask tape and acidic solutions used for etching.
11. The process is simple and fast: laser tanning processing process: degreasing, washing mold, drawing, laser processing, glossy treatment.
The emergence of laser marking texturing technology has brought innovation to the surface processing of molds. The perfect combination of digital texture design and laser marking technology makes everything possible. From the digital computer design to the generation program, the fidelity of any graphic texture can be guaranteed, and then imported into the laser marking machine equipment for processing, and the laser is used for fine processing, so as to realize the uniqueness of the product appearance, and transform the infinite imagination of the product appearance into reality.