The computer host is an important part of our daily use of the computer, it contains CPU, graphics card, hard disk, motherboard and other hardware, these hardware will generate heat when working, if the heat is too high, it will affect the performance and life of the computer, and even lead to crash or damage.
So, how much temperature is normal for the computer host? Let me introduce it to you from the following aspects.
First of all, understand the temperature detection method of the computer host.
To know the temperature of the computer host, we need to use some professional software or tools to detect, such as Master Lu, CPU-Z, GPU-Z, HWMONITOR, etc., these software or tools can display the temperature, speed, voltage and other information of each hardware of the computer host, so that we can clearly understand the working status of the computer host.
Under normal circumstances, we can run these software or tools after the computer is turned on to check the temperature of the computer host, which is the no-load temperature of the computer host, that is, the lowest temperature; Then, we can run some large software or games, put the hardware of the computer in a state of high load, and then look at the temperature of the computer console, which is the full load temperature of the computer console, which is the highest temperature. By comparing the no-load temperature and the full-load temperature, we can judge whether the heat dissipation effect and temperature of the computer host are normal.
Second, know the normal temperature range of your computer's main computer.
Different hardware has different temperature normal ranges, generally speaking, the normal temperature range is 45-65 or lower for the CPU, 50-70 or lower for the graphics card, 30-60 or lower for the hard drive, and 40-60 or lower for the motherboard.
These normal temperature ranges are determined according to different hardware brands, models, quality, heat dissipation conditions, and other factors. If the hardware temperature of the computer host exceeds the normal range, it means that there is a problem with the heat dissipation of the computer host and needs to be dealt with in time, otherwise it will affect the performance and life of the computer, and even cause crash or damage.
Finally, learn how to lower the temperature of your computer.
If you find that the temperature of your computer is too high, here are some ways we can take to reduce the temperature and improve the heat dissipation.
- Clean up the dust:Dust is one of the main factors affecting heat dissipation, which can clog heat dissipation components such as fans, heat sinks, and heat pipes, reducing heat dissipation efficiency and increasing temperature. We can turn on the computer host regularly, use soft brushes, vacuum cleaners, alcohol and other tools to clean the dust inside the computer host, and keep the heat dissipation parts clean and unobstructed.
- Replace the silicone grease:Silicone grease is a thermally conductive material used to fill the gap between the CPU and the heat sink, which can effectively conduct the heat generated by the CPU and improve the heat dissipation effect. However, silicone grease can age, dry out, and fall off over time, resulting in a decrease in thermal conductivity and an increase in temperature. We can replace the silicone grease regularly, choose a silicone grease with high thermal conductivity, and maintain good contact and thermal conductivity between the CPU and the heat sink.
- Add Fans:The fan is one of the main components of heat dissipation, it can rotate to expel hot air out of the computer host, draw cold air into the computer host, form a good airflow circulation, and reduce the temperature. We can increase the number and speed of fans, increase the air volume and pressure of fans, optimize the layout and direction of the air duct, and enhance the heat dissipation effect according to the space and interface of the computer host.
- Use water cooling:Water cooling is an efficient way to dissipate heat, which conducts the heat generated by hardware such as CPUs and graphics cards to the radiator through the flow of water through water pumps, water pipes, water tanks, radiators and other components, and then discharges the heat through fans to achieve heat dissipation. The advantages of water cooling are good heat dissipation effect, low noise, and beautiful appearance, while the disadvantages are complex installation, difficult maintenance, and expensive. We can choose the right water cooling system according to our needs and budget to improve the heat dissipation effect of the computer host.
Generally speaking, the temperature of the CPU, graphics card, hard disk, and motherboard should be below 60, if it exceeds this range, it means that there is a problem with the heat dissipation of the computer host, and it needs to be dealt with in time, otherwise it will affect the performance and life of the computer, and even lead to crash or damage.
We can use professional software or tools to detect the temperature of the computer host, or we can reduce the temperature of the computer host by cleaning dust, replacing silicone grease, adding fans, using water cooling, etc., to improve the heat dissipation effect. I hope you found this article helpful and I wish you a pleasant time using the computer.