The stone remover, also known as the grain stone remover and impurity separator, is a machine used to remove stones, mud and other impurities in the grain. Its working principle is to use the difference in the specific gravity between the material and the impurities, and separate the impurities through the action of the screen and the water flow. The main structure of the stone remover includes the feed port, screen, specific gravity adjustment device, discharge port, drive device, etc. The following is a detailed introduction to the working principle and structure of the stone remover:
Stone removal machine. 1.Working principle: The material enters the stone remover from the feed port, and separates the stones, mud and other impurities in the material through the filtration action of the screen. The specific gravity adjustment device can control the size and direction of the water flow, so that the material remains suspended in the water for better separation of impurities. The separated impurities are discharged through the discharge port, and the material is discharged from the other side of the destoner.
Stone removal machine. 2.Structure: The main structure of the stone remover includes the feed port, screen, specific gravity adjustment device, discharge port, driving device, etc.
Feed port: used to guide the material into the destoner, usually with an adjustable feed hopper in order to control the amount of feed.
Screen: It is the core component of the stone remover, which is used to separate impurities in the material. The screen is usually made of materials such as stainless steel or nylon, which has some elasticity and wear resistance.
Specific gravity adjustment device: It is used to control the size and direction of the water flow, so that the material remains suspended in the water. The specific gravity adjustment device is usually realized by means of solenoid valve or manual valve.
Outlet: Used to discharge separated impurities, usually with an adjustable discharge hopper in order to control the amount of discharge.
Drive device: used to drive the stone remover to run, usually by means of electric motor or hydraulic motor. The drive is usually installed at the bottom of the stone remover, and the screen rotates by means of a belt or chain.
Stone removal machine. The stone removal machine needs to be regularly inspected and maintained during use to ensure the stone removal effect and the normal operation of the equipment. At the same time, according to different materials and stone removal requirements, it is necessary to properly adjust the working parameters of the stone removal machine to achieve the best stone removal effect. Stone removal machine.