There are a few things to keep in mind when using vacuum coating to clean ultrapure water equipment:
1. Pretreatment: Ensure that the quality of the raw water entering the equipment meets the requirements and avoid damage to the equipment caused by impurities and pollutants. At the same time, the pretreatment system is cleaned and maintained regularly to maintain its good filtration and purification effect.
2. Reverse osmosis system: The reverse osmosis system is the core part of ultrapure water equipment, and the reverse osmosis membrane needs to be checked and replaced regularly to ensure its normal operation and filtration effect. During operation, care should be taken to avoid mechanical damage or chemical contamination of the reverse osmosis membrane.
3. Post-treatment system: The post-treatment system includes ion exchange, ultraviolet sterilization and other steps, and it is necessary to replace the ion exchange resin and clean the ultraviolet sterilizer regularly to ensure its normal operation and sterilization effect.
4. Cleaning and maintenance: Regularly clean and maintain the equipment, remove dirt and impurities inside the equipment, and keep the equipment clean and hygienic. During the cleaning process, pay attention to choosing the appropriate cleaning agent and cleaning method to avoid damage to the equipment.
5. Operation specifications: Operators need to be familiar with the operating procedures and safety precautions of the equipment to avoid equipment damage or safety accidents caused by misoperation or improper use.
6. Water quality monitoring: Regularly monitor the water quality of the ultrapure water produced.
7. Ensure that the water quality meets the requirements of use. If abnormal water quality or equipment failure is found, treatment and maintenance should be carried out in time.