Crochet ** and stitch instructions
Difficulty: Duration: 8h
With needles: 35mm
Weaving method: the whole package is a circle hook, the flowers change color to white, yellow, where to stay in **. You don't have to carry a hook together. The grid is a circle in the positive direction and a circle in the opposite direction to design the color scheme of the pixel flowers. Similar to the back and forth weaving of your crochet piece, you can see from the front that the long needle texture of the flower is actually a line of positive and a line of reverse. 120 needles are 60 holes.
Combined with the pixel map, the pixel map only looks at the number of needles of the flower, and one grid represents 1 needle long, and the yellow background does not look at it.
1 Packet Bottom.
Orange thread from 120 lock pins. It is recommended to start the needle with a long non-marking needle for each circle.
R1: Orange coil hook 120-pin long needle.
R2: Repeat the orange thread (1 long pin, 1 lock pin, empty 1, 1 long pin) to complete the hook and pull.
R3: Orange line repeats the mesh pattern.
R4: Orange line repeats the mesh pattern.
R5: Orange line repeats the mesh pattern.
R6: Orange line Repeat the hook and pull.
2 Wrap up.
*It is the side of the front flower.
On the back of this bag is a pattern of 30 sets of mesh without flowers, repeating (1 long needle, 1 lock pin, empty 1, 1 long needle). You can put a marker buckle as a mark.
Every time you change the line, remember to hide the line and press the line, so that the line can try not to see the color change traces.
From the 7th lap, color lines have been added.
Here it is said that the positive direction is to hook the front flower part first, and then hook the reverse mesh pattern, so that the hook is completed.
In the opposite direction, the mesh pattern on the back is hooked first, and then continue to the front part, so that the hook is pulled out in one circle.
R7: In the positive direction, the orange wire hook has 10 holes in the mesh part, the thread change hook has 7 white long needles, the orange hook has 3 holes, the 7 needles have white long needles, and the orange hook has 9 holes, and then to the 30 mesh pattern part on the back, hook this circle, and pull out.
R8: In the opposite direction, the back of the orange hook 30 holes to the front, hook 9 holes, change the white hook 11 needles long needle, then change the orange hook 1 hole, change the white hook 11 needle long needle, change the orange hook after the remaining hole part, pull.
r9: Same as r8
R10: After 30 holes in the opposite direction of the orange wire hook to the front, 9 holes in the orange wire hook, change to a 25-needle long needle with a white wire hook, and then change the orange hook to the hole part, and hook this circle to pull out.
r11: positive direction, same as r10
R12: In the opposite direction, the orange wire hook 30 holes to the front, hook 10 holes, change the white wire hook to 21 long needles, change the orange to continue to hook the remaining hole part of the hook and then pull out.
R13: In the positive direction, orange hook 11 holes, change to white hook for 6 long needles, change to yellow hook for 5 long needles, change to white hook for 6 long needles, then change orange hook for 10 holes to the back hook for 30 holes and then pull out.
R14: In the opposite direction, orange hook 30 holes to the front, hook 8 holes, change to white hook 10 long needles, change yellow wire hook 9 long needles, change white wire hook to 10 long needles, change orange wire hook to pull out the remaining holes.
R15: In the positive direction, orange hook 7 holes, change to white hook 11 long needles, change yellow hook to 11 long needles, change orange hook to the remaining holes and then pull out.
R16: Reverse direction, dorsal 30 holes, 6 holes, (13 white, 11 yellow, 13 white) 6 holes after extraction.
R17: Positive direction, 6 holes, (14 white, 9 yellow, 14 white) 6 holes, 30 holes on the back.
R18: 30 holes in the opposite direction 6 holes, (16 white 5 yellow 16 white) 6 holes hook pulling.
R19: Positive direction, 7 holes, (9 white, 1 hole, 9 white, 1 white, 9 white) 7 holes, 30 holes on the back.
R20: Reverse direction, 30 holes, 8 holes (5 white, 1 group of holes, 13 white, 1 white, 5 white) 8 holes.
R21: 12 holes in the positive direction (13 white) 12 holes
30 holes on the back of the eye posterior extraction.
R22: 30 holes in the opposite direction 12 holes (13 white) 12 holes after extraction.
R23: 30 holes in the forward direction 12 holes (13 white) 12 holes after extraction.
R24: 30 holes in the opposite direction, 13 holes, 9 white holes, 13 holes.
R25: Forward 14 holes, 5 white, 14 holes, back 30 holes, posterior extraction.
R26: Reverse direction, 30 holes, 14 holes + 2 holes + 14 holes after extraction.
R27-28-29-30: Repeat round-trip pattern.
R31: Positive Hook 120 short needle. Hook a short needle in each hole, and the long needle should be hooked and short.
Complete**. 
3 Wrap mouths.
R32: Hook 18-pin short pin, 100 pin clip, empty 24, 36-pin, 100 pin lock, empty 24, 18 short pin.
R33: Crochet the short needle together again.
R34: Hook a short needle at the same time as every 4 needles.